bane1985
Active Member
- Posts
- 180
- Location
- westmiddlands
Every now and then I get a beeping noise when I put key I ignition but when I start it goes away it shows this symbol on dash dose anyone now what this is.
It only dose it once in a blue moon is there a fix b4 it gets worse car starts an runs fineSearch for "crossed B " on this forum....with your fingers firmly crossed. It is rarely good news.
BCU or Fuse box related...usually caused by water ingress...I believe.
So what would you recommend mate checking them if there is water can you just buy new one and just plug it in or is the car gone I’m worried now+1 for what @Beneagles said ... start by checking if there's no water ingress in the fusebox or glovebox area and be aware that this can get only worst even end up immobilised eventually.
It is fixable thoTake your time cos all the info you need is there: https://www.landyzone.co.uk/search/51139347/?q="crossed+b"&o=relevance&c[node]=8&c[user][0]=9153
Yes it is but depends on your luck how cheap or easy will beIt is fixable tho
Ok that’s good news I’ll check for water ingress/ damage todayYes it is but depends on your luck how cheap or easy will be
I’ve had a look fuse box seems ok clean on the other hand the BCU in the courier there a bit off white stuff see picYes it is but depends on your luck how cheap or easy will be
How do I do that pal and will this solve problemJust disable the immobiliser mate
NOHow do I do that pal and will this solve problem
Lol ok I’ve been looking and don’t know if I’m looking in ryt place. I’ve found things if cars immobilised won’t start etc mine all works fine atm it came up with crossed b but now isn’t coming up no more. I’ve shown pics of that I can see do I need to just buy another BCU and just swap them over. Someone said you can’t do that and then someone said you can
I’ve found it mate and it’s from you no crank no start. Cheers mate and I’ve got phone numbers of it to if goes bad.
The BCU is not plug and play that's 100% certain no matter what others are saying... it needs complex programming with dedicated diagnostic toolI can see do I need to just buy another BCU and just swap them over. Someone said you can’t do that and then someone said you canI’
Do you now any one who has such a tool you recommendThe BCU is not plug and play that's 100% certain no matter what others are saying... it needs complex programming with dedicated diagnostic tool
UK is full of them, open and magnify this https://www.google.com/maps/d/viewer?mid=1PmbphOvO47RAsn1ZdQFDD-ed-zo&mid=1335261074&ie=UTF8&hl=en&oe=UTF8&msa=0&ll=51.068884772499985,-0.2938128223165677&z=12there if you find somebody close register here http://www.thed2boysclub.co.uk/ and send PM to himDo you now any one who has such a tool you recommend
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!