Nato Hitch Advice

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Tonybell

Member
Posts
38
Location
IG8 - UK
Hi I am Tonybell with an ex MOD Defender 2006 A2 Snatch Armoured which has a looks like un used Nato Hitch on the back but despite lots of WD40 cannot get it to lock down. Seems jammed in the open position. The 'T' bar part rocks very slightly but nothing else moves. How can I un lock it
 
Iv'e already along with another member asked/suggested....post your questions in the correct section...you will find them if you scroll down on the main page...
 
There is a locking pin that goes goes through a small hole. It’s normally a split pin or similar. There might be a bit broken off in the hole. Worth a check.
 
Look where the arrow is for part 8. Note the small hole.

1E1EC33E-BFA0-4D94-B5D4-E6F2EE7A3DD7.jpeg.bc1a797dd15f8d976ef5610df93d8be8.jpeg
 
Thank's to who ever put on this diagram of my hitch. Solved the problem now. Never been used was the problem but now OK.
Where did you get this diagram need one like this to show me the inside of the heater box which though the water pipes get hot
and the blower is working still no warm or hot air getting into the cab. Not sure what the hot & cold lever does. Does it open a vent
inside the heater box?
 
Back
Top