P38A Nanocom
- Thread starter mrtayto
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
Learn how to use it before you start changing anything, make a note of what has been changed and it's original setting. Or you can cause yourself a lot of pain. Visit the site and read up on it. Use the emulator.
Datatek
Well-Known Member
- Posts
- 43,998
- Location
- Near Poitiers SW France
+1^^^^ use your phone to photograph the settings before you make changes.
Tenebreaux
Well-Known Member
- Posts
- 3,840
- Location
- Armagh
Can't you export data to an sd card? Haven't done it myself but I'm sure I remember seeing the option.
Datatek
Well-Known Member
- Posts
- 43,998
- Location
- Near Poitiers SW France
Probably, but I do not have a Nanocom so do not know for sure, I have a Faultmate and I find it easier to photograph the screen data.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,267
- Location
- Trapped inside my head @ LZ asylum
save live data on a run. You need a particular card to work with it.
Grrrr will know the particulars.
- Posts
- 2,092
- Location
- Mull of Kintyre
Wot he said
- Posts
- 4,465
- Location
- Rotherham
Totally agree listen to what wammers is saying to you
brianp38dse
Well-Known Member
- Posts
- 19,593
- Location
- heathrow
+1 or the next thread will be ( ive buggered the settings up how can i sort it)
Had a read of the manual,couldn't see much on cards.
any more info on best card to use?hopefully i'll have a suitable one here
- Posts
- 18,969
- Location
- Buckinghamshire, UK. ('95 DT)
You can save the settings or live data. Type of card doesn't seem to matter much. Taken a the ones I have put in there but I don't buy cheapo Chinese stuff.
JUKE179r
Well-Known Member
- Posts
- 3,165
- Location
- Suffolkshire
Buy a name brand card and you’ll be fine.
I’ve got a 4GB SanDisk in my Nanocom.
I’ve got a 4GB SanDisk in my Nanocom.
Datatek
Well-Known Member
- Posts
- 43,998
- Location
- Near Poitiers SW France
Immobiliser is a simple on or off setting in the BECM, turn off EKA while you are in there. You have to "save" after you make the changes for them to take effect.
JUKE179r
Well-Known Member
- Posts
- 3,165
- Location
- Suffolkshire
If you have Motronic V8 with cruise control (CC), make sure you have the correct CC tune file for your RR's Hella CC unit...
1) First, check the main throttle cable and CC cable on the engine have the correct gap per the RAVE manual.
2) Make sure to press the CC switch on and then start engine.
3) While the engine is running, connect your Nanocom.
4) From the Nanocom home screen press R-ROVER P38 > MOTRONIC > HELLA CC > SETTINGS > scroll to the last page > under "Vehicle Tune", select your specific engine > then click on "WRITE SETTINGS".
More info on the Hella CC unit... https://www.nanocom-diagnostics.com/downloads/preview/hella-cruise-control
1) First, check the main throttle cable and CC cable on the engine have the correct gap per the RAVE manual.
2) Make sure to press the CC switch on and then start engine.
3) While the engine is running, connect your Nanocom.
4) From the Nanocom home screen press R-ROVER P38 > MOTRONIC > HELLA CC > SETTINGS > scroll to the last page > under "Vehicle Tune", select your specific engine > then click on "WRITE SETTINGS".
More info on the Hella CC unit... https://www.nanocom-diagnostics.com/downloads/preview/hella-cruise-control
- Posts
- 58,170
- Location
- Preston Lancs.
OP has a diesel.
JUKE179r
Well-Known Member
- Posts
- 3,165
- Location
- Suffolkshire
Welp… disregard then.
i've a diesel.sorry should have said in my opening post
JUKE179r
Well-Known Member
- Posts
- 3,165
- Location
- Suffolkshire
No problem mate. Maybe my post will help a future motronic RR owner with a Nanocom. lol
