frosty2008
New Member
- Posts
- 95
- Location
- Tenterden, Kent
hi guys
ive done a search and some reading on this but cant seem to pin down an answer.
i have a coolent loss that only seems to manifest its self when i use the heating system. if i turn on the fans raise the temperature or anything the level goes down. i have changed the O rings so im thinking along the lines of the following
Ive heard talk of flushing/back flushing the system but im unclear how to.
is there anything i should be looking at in specific before i shell out for expensive components? ill take it by to my mechanics for a pressure test this week.
cheers
frosty
ive done a search and some reading on this but cant seem to pin down an answer.
i have a coolent loss that only seems to manifest its self when i use the heating system. if i turn on the fans raise the temperature or anything the level goes down. i have changed the O rings so im thinking along the lines of the following
- heater matrix
- radiator
- and porous block or head gasket (god i hope not)
Ive heard talk of flushing/back flushing the system but im unclear how to.
is there anything i should be looking at in specific before i shell out for expensive components? ill take it by to my mechanics for a pressure test this week.
cheers
frosty