silkmead
Banned
- Posts
- 85
- Location
- Hare Street
iv recently bought myself a 300tdi discovery as a project and to use as an every day car/tow car so i can restore my classic and my alfa
it is a 98 r reg reasonable condition body work and runs well
the sills need doing and the front floors are rusty
i have a fairly short timescale to get this on the road as i need to start using it soon but more importantly it wants to be done right so i dont have to do it twice if it takes 3 months then id rather it did than was rushed
iv started a list of things to do
welding
1 new front floors
2 boot floor
3 rear arches
4 both sills
5 bases of a and b pillars
6 front inner wings
7 few little bits of plate here and there
other stuff
1 shocks
2 springs
3 polys all round
4 prop ujs
5 rear wheel bearings
6 2 new tyres
7 service engine
8 egr blank
9 wind up diesel pump a bit
10 fix rear tailgate lock
11 fit new radio and speakers
theres lots of other bits i want to sort but some will be done once the car is on the road
iv started over last few days and iv taken some pictures
it is a 98 r reg reasonable condition body work and runs well
the sills need doing and the front floors are rusty
i have a fairly short timescale to get this on the road as i need to start using it soon but more importantly it wants to be done right so i dont have to do it twice if it takes 3 months then id rather it did than was rushed
iv started a list of things to do
welding
1 new front floors
2 boot floor
3 rear arches
4 both sills
5 bases of a and b pillars
6 front inner wings
7 few little bits of plate here and there
other stuff
1 shocks
2 springs
3 polys all round
4 prop ujs
5 rear wheel bearings
6 2 new tyres
7 service engine
8 egr blank
9 wind up diesel pump a bit
10 fix rear tailgate lock
11 fit new radio and speakers
theres lots of other bits i want to sort but some will be done once the car is on the road
iv started over last few days and iv taken some pictures
