my disco 4 suspention issues

hi guys and dolls
i have had my disco 4 for around 3 years now its a great car wife and grand kids love it just over a year ago the car died engine was seized it lay in a local garage for six months they said due to covid they could not get parts etc so i contacted a place in london to rebuild the engine they said ship it to us i done that and they were true to thier word a 14 day turn around so i got it carted from here to london they sent me pics and regular updates etc the inside of the block had imploded crank shaft was split in two etc i now have a regular warning message on the dash saying suspention fault /slow down or suspention will rise what can this issue be its a 2011 car with an engine thats only done around 1100 miles from the engine was rebuilt any advice would be great TIA

Nothing todo with your engine, as the car tells you suspension fault.
Get it plugged in a codes read 1st port of call.

Could be when they lifted the body they may have damaged the casing of the compressor or caught a pipe, take a look under drivers side rear cill.
As said get codes read before spending any money.
Not always cheap/convenient to get codes read, and if you are keeping the car it may pay to get your own code reader, I carsoft930 is pretty good value at 100quid.

Hello and welcome

Welcome to the forum

Consider disabling the keyless entry to make it more difficult to nick. Instructions at the top of the disco section below.

Main forum index:
https://www.landyzone.co.uk/forum

Discovery:
https://www.landyzone.co.uk/forum/land-rover-discovery.8