My bulkheads not well.

I'm looking for somewhere decent that can fix/replace.
I'm in Sutton Coldfield.
My landy is a complete bitsa so knowing what is from when would be good rather than going off the numberplate.
Any recommendations?
Cheers
Grebby

I used these guys (link) for my series III bulkhead. They were competitively priced and did a good job. But I dont know what their current lead time is. It was nearly 6 months when I had mine done so I bought a 2nd hand replacement and had that refurbed so I wasn't off the road.

Thanks. I can't really get it off myself so I am looking for somewhere that I can drop off landy and then come back later and hey presto a bulkhead without holes. I know it's going to be expensive but I don't have the time/space to do it myself.
Cheers
Grebby

Grebby said:

Thanks. I can't really get it off myself so I am looking for somewhere that I can drop off landy and then come back later and hey presto a bulkhead without holes. I know it's going to be expensive but I don't have the time/space to do it myself.
Cheers
Grebby

Click to expand...

It wouldn't take that long to swap you could do it in a long day with help you don't exactly need to do it fully like you can do all the stripping bits down then one day take off and put new one on to get it watertight/secure then next day do all the rest wouldn't be as hard as you think. Big mechano after all. Save you alot of money too
You might even find someone local on here to help if lucky