My 1st Landy

at last Ive collect the 1987 Landrover 90- it drives very well a few minor faults - the passenger side window sticks half way down- my guess is the runners and worn/bent or rusted!

The MUD tyres she has on are a little noisey on the road- I intend to change them for some Grabber AT2's very soon- funds allowing

I'll be selling the soft back complete with rails etc ( not sure how much its worth so any help will be appreciated) ??## value etc-

its Exmoor trim and in very good condition no rips tears or straps missing - I just don't need it - surplous to my plans

Like the pick up look and half the rear space will be taken up by a tool box covered with alloy chequer plate Hmmm nice and some decent wheel should finish her off a treat

heres some photo's








Les

very nice that .... so what are yer plans then ??

The softtop with all th rails & fittings is worth approx £150/200 2nd hand if it's in as good a condition as it looks.

My plans include a snorkel- 2" lift- an alloy clad tool box to fill half of the pick area- sell the soft top canvans and rails ( £200) sounds nice its all it very good condition no rips tears or missing straps-so should reach top dollar and I have no use for it to be honest

rock slider / sump guard etc- I do some shooting so it need to 100% off road- I know AT's are not all that- but I commute to work so need some sort of road/off road tyres so I'll stick some Grabber at2's on alloys if I can get some fail that I'll keep the rims she has or buy black 8 spoke steels

New to all this so there well may be lots of questions to follow


Les

Lez325 said:

the passenger side window sticks half way down- my guess is the runners and worn/bent or rusted!

Click to expand...

Probably teeth missing on the arm, you can fix them with a bit of weld then grind them into teeth shape.

Lez325 said:

My plans include a snorkel- 2" lift- an alloy clad tool box to fill half of the pick area- sell the soft top canvans and rails ( £200) sounds nice its all it very good condition no rips tears or missing straps-so should reach top dollar and I have no use for it to be honest

rock slider / sump guard etc- I do some shooting so it need to 100% off road- I know AT's are not all that- but I commute to work so need some sort of road/off road tyres so I'll stick some Grabber at2's on alloys if I can get some fail that I'll keep the rims she has or buy black 8 spoke steels

New to all this so there well may be lots of questions to follow


Les

Click to expand...

sounds good that .. dont ferget piccies will ya .....

discomania said:

Probably teeth missing on the arm, you can fix them with a bit of weld then grind them into teeth shape.

Click to expand...

will ya stop talkin about teef ........ i gorra toof problem meself ... but i'm bein very brave and not moanin about it ...

lrb2 said:

will ya stop talkin about teef ........ i gorra toof problem meself ... but i'm bein very brave and not moanin about it ...

Click to expand...

ay tell ya go get a little bottle of clove oil from the chemist and dab a bit on yer gums where it's hurting

Sean said:

ay tell ya go get a little bottle of clove oil from the chemist and dab a bit on yer gums where it's hurting

Click to expand...

problem is it aint really a tooth problem ..... its a jaw bone problem that feels like tooth ache .... i need an operation so i'm told .... a bone graft to be precise ....


its not that bad really , it just gets on me tits at times ....

lrb2 said:

problem is it aint really a tooth problem ..... its a jaw bone problem that feels like tooth ache .... i need an operation so i'm told .... a bone graft to be precise ....


its not that bad really , it just gets on me tits at times ....

Click to expand...

no wunda it hurts if its that big.

hehehe... not that big .....

When you come to advertise it its a 3/4 tilt.