Mud in Chassis - How to get it out?

Anyone got any ideas how to get dried mud out of mi 110 chassis?
It's set solid and startin to sprout green bits, could end up wi a tree inside the chassis

pressure washer

Karcher K299MB+ Pressure Washer 110bar 1.4kW 240V - Screwfix.com, Where the Trade Buys
i got this one which is more than good enough for tuff mud!

Where do ya stick the nozzel then and where does the mud come out

a hole

any other hole.

deep wading!

nickliv said:

deep wading!

Click to expand...

That's how it got in:mad2:

there are holes all over the chassis just stick the nozzle in and give it a blast the mud should come out

l90edb said:

there are holes all over the chassis just stick the nozzle in and give it a blast the mud should come out

Click to expand...

I'll get on it next week, trouble is , it's set like concrete

ull just have to keep the water going through so it softens up and then it shud start going! alternitivly go and see a local farmer and ask if u can use his steam deisel pressure washer there ****ing powerfull and will get rid of anything but dnt spray too close to paint cous it will come off!
of course u could buy one but there bout 1300£

l90edb said:

ull just have to keep the water going through so it softens up and then it shud start going! alternitivly go and see a local farmer and ask if u can use his steam deisel pressure washer there ****ing powerfull and will get rid of anything but dnt spray too close to paint cous it will come off!
of course u could buy one but there bout 1300£

Click to expand...

Me brothers gor a steam cleaner, now can I shove it in the front somewhere and blast away until the mud/rust comes streaming out the holes

ill take some pics of my chassis for u 2moz and get back to you cous it may be that chassis are different. wat LR do u have?

sorry just saw 110. ive got a 90 so it may be different but i will still take some pictures

l90edb said:

sorry just saw 110. ive got a 90 so it may be different but i will still take some pictures

Click to expand...

Appreciate it, just finished the JD so off to bed

you could always buy a new chassis ? a lot more expensive than the steam cleaner but the results are way better.

vivnap said:

you could always buy a new chassis ? a lot more expensive than the steam cleaner but the results are way better.

Click to expand...

800+£ or £100 and elbow grease? clearly money is no issue for u?!?

Put corks in the big low holes along the length of it.

Put a schoosh of detergent into each side and fill with a hose.

Leave it to soften the mud for a morning then let it all drain out.

Park it on a hill or put blocks under the wheels then, keeping most of the corks in along the length of the rails now run a hose through it to wash the stuff out.

best way i find is get a long normal hose pipe feed it in in the hole at the front of chassis and you can with a bit of a wiggle feed it all the way back i find i can flush it al out that way

here are the pictures of the holes in my chassis, as i said mine may differ from urs but im pretty sure they should b the same.

it wont let me upload the pics but have look under ur landy and u will see them they are hard to miss
let me know how u get on