Moving hazard, fog, screen...

The Badger

New Member

Posts

117

• Sep 13, 2010

• #1

I'm moving the switches from below right of the steering wheel to my mud console, are there any extension looms available or is it a case of knocking my own up? If so, anyone done it and know what rating of cable I should use for each extension length as they all appear from a quick look earlier different gauges?

 

instantsquid

New Member

Posts

1,362

Location

Tadley, Hants

• Sep 13, 2010

• #2

I made up my own "extension" loom to move all the switches including those on the side of the steering column, onto my MUD console. I didn't use different guage wire - just whatever I had hanging around that was at least as meaty as the original stuff.

 

The Badger

New Member

Posts

117

• Sep 13, 2010

• #3

Instantquid, where did you route your loom, up and through the back of the dials?

 

instantsquid

New Member

Posts

1,362

Location

Tadley, Hants

• Sep 14, 2010

• #4

The Badger said:

Instantquid, where did you route your loom, up and through the back of the dials?

Click to expand...

Yep. Made all the connections directly behind where the switches were originally located, then cable-tied the extensions together and ran it behind the dash/dials and along the front of the dash "shelf" behind the lip on the front.

Ian