bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
tis good kit and a reasonable price too.i prefer the look of the mud one me sen![]()
Was it a big job Trewy and what did ye need to do?sorry, dunt got no decent pics.
can take some tomorra if yer need em?![]()
tip the seat-backs forwardWas it a big job Trewy and what did ye need to do?
please define "dole scum"aye but we aint all dole scum, some of us are tired after a day at werk![]()
repair sliced fingers where yer dint de-burr the cut-out
rivet and bolt it all up.
unemployed cockerknee thats moved ter the a nice holidaying part of the country to freeload off the state, get out of bed around lunch time, then spend the rest of the day playing on tinternet !
hows that![]()
dunt want / need it at the moyer wanna get yer arse up the job centre, theres plenty o work fer the fookers that want it![]()
Cheers Trewytip the seat-backs forward
remove the capping from the bulkhead by drilling out the rivets, then ammerrin it.
offer up the bar and use it as a template to mark the cut-out, bolt and rivet holes
buzz along the line with the jig saw
drill out the rivet and bolt holes
persuade the bar and end brackets into place wiv a nammer
repair sliced fingers where yer dint de-burr the cut-out
rivet and bolt it all up.
vacuum up all the swarf
tip yer seats back up
job done
took me about an hour an arf
aint gonna be a truckcab fer much longera bit fookin draughty on a truckcab tho![]()
300 tdi much beterNot to sure, but for me the 200tdi, easiest to work on so suits me just fine![]()
![]()
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!