Mackers' Def 90 - Who needs Cloud Storage when you can have your own thread?
- Thread starter Mackers
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Says the man who put a rusty engine back into a shiny new chassis
Says the man who didn't. D'ya know? It's very difficult to construe another's post. Is it jovial banter, jealousy; someone having a bad day, ... . All I can do is send love and peace energy back to all the poor souls who prefer to err on the negative.
Hicap phill
Well-Known Member
- Posts
- 15,422
- Location
- Wiltshire
re seat bases. You have a tidy motor & want to continue with the good work.
Make sure the welds are ok across the front so the foam does not fall out.
As the seats are apart what about heated seats? Easy to fit
Make sure the welds are ok across the front so the foam does not fall out.
As the seats are apart what about heated seats? Easy to fit
Lol. I'm gonna make a list of the light and dark shades of LZ members next. I have two very serious ones on the list who are never joking, and I'm to develop a thick skin and stop showing off. I have other LZ friends (yourself now on it) who like a laugh. I'm in this shaded area myself. Then there are the neutrals (just the nice, mentor-type LZers). Who else is what? We might never know
Cheers. Just looked. This one (drivers) is A1. It might be newish, I dunno, but I'll know to check that with the other two nowre seat bases. You have a tidy motor & want to continue with the good work.
Make sure the welds are ok across the front so the foam does not fall out.
As the seats are apart what about heated seats? Easy to fit
Hicap phill
Well-Known Member
- Posts
- 15,422
- Location
- Wiltshire
Your on members builds & everyone shows off any pictures of the builds. This Does help some people.
I like seeing what people do & sometimes may have a go. But as it took me 2 years from getting a bulkhead to fitting( not all delays were caused by me) I don't build things fast.
Yep my motor was purchased 1992 & rebuilt. It's not show room condition but it used to be a work horse. I still get enjoyment from tinkering with it & each dent tells a story.
Here's our 3 motors in France.
Mine
Mrs(series 1)
Shared triumph with family member & a friend was running it in.
Show & be proud....
I like seeing what people do & sometimes may have a go. But as it took me 2 years from getting a bulkhead to fitting( not all delays were caused by me) I don't build things fast.
Yep my motor was purchased 1992 & rebuilt. It's not show room condition but it used to be a work horse. I still get enjoyment from tinkering with it & each dent tells a story.
Here's our 3 motors in France.
Mine
Mrs(series 1)
Shared triumph with family member & a friend was running it in.
Show & be proud....
Hicap phill
Well-Known Member
- Posts
- 15,422
- Location
- Wiltshire
That's a triumph herald.
This is used on long trips to car shows or classic rally stages. Landrovers are flat out at 40.
This is used on long trips to car shows or classic rally stages. Landrovers are flat out at 40.
Love all three. Just sorry I can't technically/mechanically comment as LZs do, but hey! I can admire them, imagine them being enjoyed on the road, and that's all that mattersThat's a triumph herald.
This is used on long trips to car shows or classic rally stages. Landrovers are flat out at 40.
The right badge for 92 (apparently according to above post) on today. I'm not sure it's right, but it's oem so I dunno???? Also, left indicator, but not complete yet as it's missing a u clip, which I'm getting a pack of tomorrow. As I'm doing headliner in new year (and because I've heard horror stories about getting the plastic push clips out), I had a bash at getting two out. A lot of the rough and ruggeds who like to rough it with their tratters might be interested to know that our vehicles love hairdryers. Whilst I had it out to easily get the old front badge off, I had a thought of warming the plastic studs up, It softens the plastic and they came out easily.
View attachment 164760today
View attachment 164760today
Last edited:
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
only been able to look at the photos now i am on a proper computer, not my phone. I think you have done alright to be hinest, i think its a nice 90.
Also mine is a 91 and has that exact same grille badge you have fitted, looks nice.
Also mine is a 91 and has that exact same grille badge you have fitted, looks nice.
Wow. The springs look really substantial, and the fuel tank (if that's what it is) is massive. Looks brill!
That's good to know (the badge).
It’s a 110 Hi-Cap and the tank is large, the springs are HD but will be used to carry and tow., it’s had everything done!
Hicap phill
Well-Known Member
- Posts
- 15,422
- Location
- Wiltshire
No this is what a hicap should look like
Just putting the roof back on.
The tanks are 100litres
Watch having heavy springs it makes the back end lively
Just putting the roof back on.
The tanks are 100litres
Watch having heavy springs it makes the back end lively
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
No this is what a hicap should look like
Just putting the roof back on.
The tanks are 100litres
Watch having heavy springs it makes the back end lively
View attachment 164778
your not wrong about the springs, unloaded its makes them skip around awfully.
A 90 with HD springs on the rear is awful.....
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Similar threads
