SnowmanV8
Well-Known Member
- Posts
- 3,938
- Location
- Portishead, Near Bristol
Been offered a cheap lpg kit off a chevy blazer V6. Will I be able to but an 8 cylinder injection part/parts and swap it over or will it be no good!
Lpg kits I have no idea lol
- Thread starter SnowmanV8
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
SnowmanV8
Well-Known Member
- Posts
- 3,938
- Location
- Portishead, Near Bristol
Right I got it for £0 notes time to start swatting up on LPG kits!
200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
Is it single or multipoint ?
SnowmanV8
Well-Known Member
- Posts
- 3,938
- Location
- Portishead, Near Bristol
200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
Looks like a single point in which case the distributor won't work for multi point which I think is what you're After this injects into the air feed before the plenum and mixes to the cylinders through the air
lorri789
Well-Known Member
- Posts
- 4,657
- Location
- West Stirlingshire
I can post some photos of my single point later if it will help. I have a Tartarini tech97/99. Single point does indeed connect from the vaporiser to a point just before the plenum.
SnowmanV8
Well-Known Member
- Posts
- 3,938
- Location
- Portishead, Near Bristol
I thought you could run single point.
Please I may be wrong but thought single point would work, If it works well enough to save me money till I can afford multi point that's good enough or I'll carb it!
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
Carbing will only cost you £50 odd too 
just need the carb manifold which is cheap with strombergs. I sold mine for £25 and then a new valley gasket for a few quid
just need the carb manifold which is cheap with strombergs. I sold mine for £25 and then a new valley gasket for a few quid
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
you can run single or multi system on 3.9 efi ,though i wouldnt bother with that ebay one ,in its simplest form you just need tank or tanks ,filler and pipe ,vaporiser and mixer ring
lorri789
Well-Known Member
- Posts
- 4,657
- Location
- West Stirlingshire
Yep, it really is simple. There is a wire that runs to a switch as well and that's yer lot.
SnowmanV8
Well-Known Member
- Posts
- 3,938
- Location
- Portishead, Near Bristol
Too late
oh well lolWicked I'll keep swatting up till it gets here then have a go at fitting then panic and put up an SOS thread lol!
lorri789
Well-Known Member
- Posts
- 4,657
- Location
- West Stirlingshire
Okay then , I only took the effort the look at the LPG this week to see how it worked. I didn't even know where the pipe went.
