Low annual mileage

While I’m waiting for the stuff for the filters and oil to turn up, I know there’s a decent amount of ground clearance under FL’s but where is a suitable trolley Jack point to enable axle stands to be used. I’ve another thread going (Whine, whine, whine) and I’ve noticed an oil leak aroungtthe gearbox area towards the nearside just behind the FNS wheel that’s going to need looking at.
Cheers,
M

MaxTheDog1 said:

but where is a suitable trolley Jack point to enable axle stands to be used.

Click to expand...

The whole front or rear can be lifted with a trolley jack, leaving the side jacking points free for axle stands.
There are marked positions (they are X shaped) for a trolley jack on the undersides of both the front and rear subframes.

Thanks Nodge.

Update:
Fluids replaced - Engine oil, gearbox, IRD. Diff to be done when temperature outside goes up!
Filters replaced - oil, air, PCV, turbo boost solenoid, fuel.
EGR cleaned. Associated pipe work/hoses to be done when weather warms up.
Bit lumpy on tickover today…..
Thanks to all for your help and advice.
M.