1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. Welcome To LandyZone!

    LandyZone is the biggest Land Rover forum on the net. We have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.

    Registering is free and easy just click here, we hope to see you on the forums soon!

Freelander 2 (LR2) Loss of power/ faults

Discussion in 'Land Rover Freelander' started by Usman, Nov 10, 2019.

< Previous Thread | Next Thread >
  1. Usman

    Usman New Member

    Joined:
    Nov 10, 2019
    Posts:
    3
    Likes Received:
    1
    Location:
    Birmingham
    iv been having an ongoing problem with a grinding noise from my front left tyre and slight rumbling, took it to a mechanic who said it was likely just cheap break discs wearing in, today that rumbling turned into a grinding noise, I lost power intermittently whilst in a tunnel and I have now got hdc not available, stability control not available, emergency brake assist not available, what could my problem be, thought I’d reach out to see if something similar had happened to you guys or if you had an insight.

    thanks
     
  2. Dorset_dumpling

    Dorset_dumpling Active Member

    Joined:
    Nov 5, 2019
    Posts:
    196
    Likes Received:
    69
    Location:
    Poole, UK
    Sounds like a wheel bearing. IIRC the wheel bearing contains the magnets for the HDC/TCS sensors. If this fails you will get HDC and TC probs.
     
    Usman likes this.
  3. Nodge68

    Nodge68 Well-Known Member

    Joined:
    Nov 15, 2011
    Posts:
    18,546
    Likes Received:
    3,680
    Location:
    Near Newquay
    As above. Sounds like a wheel bearing has collapsed, upsetting the ABS system.
     
    Usman likes this.
  4. Usman

    Usman New Member

    Joined:
    Nov 10, 2019
    Posts:
    3
    Likes Received:
    1
    Location:
    Birmingham
    Thanks guys, I really appreciate your response, I will have it checked out, many thanks
     
  5. Usman

    Usman New Member

    Joined:
    Nov 10, 2019
    Posts:
    3
    Likes Received:
    1
    Location:
    Birmingham
    Hi, had it checked out today, and was the bearing which I had replaced, is as good as new, thanks a lot guys.
     
    Hippo likes this.
  6. Hippo

    Hippo Lord Hippo

    Joined:
    Nov 22, 2007
    Posts:
    31,541
    Likes Received:
    9,271
    A good result. Thanks for letting us know.
     
  7. Nodge68

    Nodge68 Well-Known Member

    Joined:
    Nov 15, 2011
    Posts:
    18,546
    Likes Received:
    3,680
    Location:
    Near Newquay
    So what went wrong with the bearing you fitted?
     
< Previous Thread | Next Thread >