Location of my horns in 2000 DiscoII
- Thread starter Cals
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
fireman-andy
New Member
- Posts
- 222
- Location
- surrey
Hi,
according to rave , it is behind the front grille.
Andy
according to rave , it is behind the front grille.
Andy
fireman-andy
New Member
- Posts
- 222
- Location
- surrey
Pasted from the rave cd
1. Remove front grille.
+EXTERIOR FITTINGS, REPAIRS,
Grille - front - up to 03MY.
2. Disconnect multiplug from horn.
3. Remove nut securing horn to body and remove
horn.
Refit
1. Fit horn to body and tighten nut to 13 Nm (10
lbf.ft).
2. Connect multiplug to horn.
3. Fit front grille.
1. Remove front grille.
+EXTERIOR FITTINGS, REPAIRS,
Grille - front - up to 03MY.
2. Disconnect multiplug from horn.
3. Remove nut securing horn to body and remove
horn.
Refit
1. Fit horn to body and tighten nut to 13 Nm (10
lbf.ft).
2. Connect multiplug to horn.
3. Fit front grille.
Kernow nige
New Member
- Posts
- 1,286
- Location
- Landyless in KERNOW
Are they twin horns? only mine seems really quiet, as if there's only one
foss
New Member
- Posts
- 1,734
- Location
- The muddiest driveway in Essex
no 2-one high/one low tone-one each side...I moved mine to the bulkhead as they get water damage off roading.But then they were proper quiet-I got air horns on the roof now-PAAAAARRRRRRRRRRPPPPPP!!!!!!!!!!!!!
foss
New Member
- Posts
- 1,734
- Location
- The muddiest driveway in Essex
well dunno-my alarm sounder is a siren in the rear quarter but my mates works off the horns-odd.
They fit 2 to make the tone better-a high or low on its own sounds-not like 2!
You should have the loom for it there then...get one from a breakers
They fit 2 to make the tone better-a high or low on its own sounds-not like 2!
You should have the loom for it there then...get one from a breakers
