LM322 alloys on 2004 disco?

Season's greetings all. Can I fit these 18'' Range Rover alloys to my 2004 Td5?

RANGE ROVER 18 INCH ORIGINAL ALLOY WHEELS on eBay (end time 05-Jan-10 22:06:15 GMT)

Tyres are apparently 255/60 R18 112H. Don't see them in the tyres sticky.

Thanks in advance

Bill

yes they fit, and they look awesome on a TD5, and look even better if you have AT2 tyres, heres a photo of mine with 255/55 18 tyres on it! hope this helps mate!
(any excuse to show off pix )

Forgot to mention aswell, you need different wheel nuts to get them to fit!

jimbo-td5 said:

Forgot to mention aswell, you need different wheel nuts to get them to fit!

Click to expand...

hi

that front bumper if i can call it that looks awesome, where did you get it?

Land Rover Discovery 2 winch bumper on eBay (end time 25-Dec-09 14:21:29 GMT)

thats it mate, ill try and find a better pic now!

mjlperformance????/ has Tigger got a noo hobby?

jimbo-td5 said:

Land Rover Discovery 2 winch bumper on eBay (end time 25-Dec-09 14:21:29 GMT)

thats it mate, ill try and find a better pic now!

Click to expand...

do you have a photo of it on the front of your disco

No but ill get one for you tomorrow buddy!

heres the pic u asked for, sorry its a bit crap but it gives you an idea of what it looks like!

is that jacking points for a hi lift jack under the headlights? i am guessing you will be putting some protection for the radiator on,

i am hoping to change from my p38 to a TD5 Disco some time next year and looking to do something the same, will have to save some money first though

yes they are hi lift points, and what do you mean by protection for the radiator??

it looks like the radiator is lower than the winch bar or is it a cross menber i am seeing in the photo

Its actually a plastic trim that guards the sump that I left on, because if I cut it off you will see the bottom of the engine and will probably look terrible. I plan on getting a steering guard after xmas. none of the ones I can find for a D2 match this bumper, but m+m 4x4 do exactly the same bumper and I emailed them to ask them if theyre gonna make one, and they said they will be releasing the steering guard to match it in the new year, so if its good looking ill get it!

I found out what year the LM322 was that the alloys came off (important). Armed with this info, ordered a new nut set, locking wheel nuts, spigots and a new tyre wrench. All of this is essential if you're changing to LM322 alloys, and eye-wateringly expensive.

But they look nice.

yeahh the nuts were on the wheels when i bought them but the locking ones came to about 65quid! but your right, they look awesome!