Hello All,
I'm trying to work out a few things from my current wiring - I'm looking for some help to work out whether my lights switch on the dash is working, and how it should work if it is; also, what Dynamo I have fitted and what the connector/pin out is on it. Any help would be much appreciated!
First - lights switch. It has 3 switch positions and 8 connections on the back, numbered 1-8. connections 2,3 & 5 don't have spade terminals.
I'm not sure what I was expecting, but with a multimeter I've not managed to get much sense out of it. It seems that pins 1,3,5 & 7 are always connected together (i.e. LHS in photo), pin 6 is connected to those when the switch is in mid/upper positions, and 4 is connected to them when in the down position.
This doesn't seem right, as effectively the switch only has 2 positions?
Cany anyone help with an internal diagram of the switch, and how they'd expect it to be wired up? Is it broken?
Dynamo - can anyone identify this dynamo? The connector on it is quite modern so I'm wondering if it's a dynamo at all - but then I can't explain the regulator on the vehicle if it's not. It's labelled Lucas.
Does anyone know the pin out for the connector - if it's a dynamo, which is D and which is F inside the plug? It's not got spade terminals.
Thanks in advance!
B
I'm trying to work out a few things from my current wiring - I'm looking for some help to work out whether my lights switch on the dash is working, and how it should work if it is; also, what Dynamo I have fitted and what the connector/pin out is on it. Any help would be much appreciated!
First - lights switch. It has 3 switch positions and 8 connections on the back, numbered 1-8. connections 2,3 & 5 don't have spade terminals.
I'm not sure what I was expecting, but with a multimeter I've not managed to get much sense out of it. It seems that pins 1,3,5 & 7 are always connected together (i.e. LHS in photo), pin 6 is connected to those when the switch is in mid/upper positions, and 4 is connected to them when in the down position.
This doesn't seem right, as effectively the switch only has 2 positions?
Cany anyone help with an internal diagram of the switch, and how they'd expect it to be wired up? Is it broken?
Dynamo - can anyone identify this dynamo? The connector on it is quite modern so I'm wondering if it's a dynamo at all - but then I can't explain the regulator on the vehicle if it's not. It's labelled Lucas.
Does anyone know the pin out for the connector - if it's a dynamo, which is D and which is F inside the plug? It's not got spade terminals.
Thanks in advance!
B