Length of load space in Series II

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
O

Overland

New Member
Posts
47
How much useable length does the load space on a Series II hard top have when the door is closed? Not concerned about the width, just the length.
 
Last edited:
There's no easy answer to this question, because of the shape of the bulkhead at the front of the loadbed. I think most if not all Land-Rovers have a spare wheel mounting bracket fitted to the bulkhead which takes up some space, though it can be unbolted. and there may be seat belt mounting brackets fitted against the bulkhead and floor. If you were wanting to know the size of the largest rectangular box that would fit in the loadbed, then the length would be about 1023mm. If you removed the spare wheel mounting bracket then you would gain an extra 22mm. With the spare wheel carrier and seat belt mountings in place than the longest sheet of ply you could fit in flat on the floor would be about 1148mm
 
You must log in or register to reply here.

Similar threads

landowner
LWB overall length ??
Replies
14
Views
1K
landowner
landowner
pabloako
Length of accelerator push/control rod (Series 2)
Replies
4
Views
403
pabloako
pabloako
Gatherrover
Series 2 Series 2 wiper motor alternative (en arms)?
Replies
3
Views
525
Hicap phill
H
dag019
Station wagon measurements
Replies
1
Views
230
dag019
dag019
A
New Member Hello from Stoke-on-Trent
Replies
5
Views
437
aaronparke1
A
Back
Top