LED bulbs

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I want to replace the front side lights and the rear registration plate lights on my 2003 GS TD4 with white LED's

I think the front ones are push fit W5W, but will I need the Canbus type? Or is that only a worry on higher spec models with a trip computer?

My main question though is, what type are the two small registration plate bulbs in the rear door handle? These seem to be a twist fit directly on to a small circuit board, but the existing bulbs on mine don't have any markings to identify them?????

All suggestions (for suitable bulbs) gratefully anticipated!
 
I want to replace the front side lights and the rear registration plate lights on my 2003 GS TD4 with white LED's

I think the front ones are push fit W5W, but will I need the Canbus type? Or is that only a worry on higher spec models with a trip computer?

My main question though is, what type are the two small registration plate bulbs in the rear door handle? These seem to be a twist fit directly on to a small circuit board, but the existing bulbs on mine don't have any markings to identify them?????

All suggestions (for suitable bulbs) gratefully anticipated!

Hi , well i changed my front sidelight w5w bulbs for leds with 6 leds on one bulb, they looked great but only lasted about a week before 2 or 3 of the little leds went down, i sent them back to supplier who exchanged them but you guessed it after a week they went down too.
So its back to the old types bulbs .
As far as i can remember the number plate bulbs are the same ....oh and i didnt need canbus on my 2002 td4 but the supplier will advise you on that
 
Back
Top