Leaking DSE fuel pump

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I had a bar-steward of a time getting mine to run smoothly afterwards. I had to tighten it up little by little, tapping it by miniscule amounts to keep the revs steady on 750rpm. It still drifted a little afterwards but then it settled down over the next day and has been perfect since. I suspect the pump is worn but I'll wait for it to do something before I attempt that!
 
yes your qaunity adjustment houing is slightly out you should always mark them before removal well done in the reseal. now keep an eye on the injector head

Injector head? you got me all worried now!






A bit of tapping back and forth today and bingo all is well, no doubt on to the next problem!

thanks again all.

Steve.
 
Injector head? you got me all worried now!






A bit of tapping back and forth today and bingo all is well, no doubt on to the next problem!

thanks again all.

Steve.

Changing the pressure head O'ring really does need know how or you can get in a lot of trouble.
 
Back
Top