Hi, I wondered if anyones ever had an issue with a leaking abs valve block? Half way to work this morning the brake pedal went soft and warning started flashing up on the dash about low brake fluid. I notice some over the resivour and abs block leading down to the lower arms. I'm really hoping this is something like leaking from the cap, but wondered if anyone else has experienced this before or had problems with a leak from the block.. please help!
leaking brake fluid 1999 p38
- Thread starter danrange4
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
TAKdriver
Active Member
- Posts
- 621
- Location
- Beside a field in Midlothian
Has it been looked at recently ? I had some spillage from the lid : turned out it had been overfilled. Check the Min & Max lines on the reservoir. Fill to max and check hourly after drying everything off.
TAKdriver
Active Member
- Posts
- 621
- Location
- Beside a field in Midlothian
Open the first bleed valve and take out enough to get you down to Min/Max area. Even with cap on I was getting spillage : all fixed since I reduced the level in the reservoir. Don't know if that's you answer but it looks like no coincidence that it happens after yer brake lines are done and you overfill.
It's worth a try.
