Land Rover 110 Door handle part numbers required?

Can anyone help, I don't have a parts number manual and I am trying to find part numbers or replacement interior door lock/opener and door pull handle (drivers side). Hopefully the link below takes you to picture of what mine should look like? The door locks look similar to the ones used on cars such as MGB's etc.

Thanks in advance..

http://www.2040-cars.com/Land-Rover...ender-110-county-station-wagon-3-5-v8-658696/

Spam advert

http://www.lrseries.com/shop/produc...ANDLE-INNER-RH.html?search=door handle&page=1
???

Beneagles said:

http://www.lrseries.com/shop/product/listing/4694/DBP5840PMA-FRONT-DOOR-HANDLE-INNER-RH.html?search=door handle&page=1
???

Click to expand...

Mine looks more like this (see below) but all black plastic.

http://www.ebay.co.uk/itm/142069583231?clk_rvr_id=1073362880658&rmvSB=true
http://www.ebay.co.uk/itm/142069583231?clk_rvr_id=1073362880658&rmvSB=true
Sorry for using American advert in first post but I don't have a picture to hand and it's dark now

Flossie said:

Spam advert

Click to expand...

Sorry for using advert it was the only picture I could find on Google, I have nothing to do with the persons selling the vehicle

I think those were the left-over Marina ones that LR used for the earliest Fenders....
http://hooniverse.com/2010/08/30/mo...o-know-about-the-morris-marinas-door-handles/

Beneagles said:

I think those were the left-over Marina ones that LR used for the earliest Fenders....
http://hooniverse.com/2010/08/30/mo...o-know-about-the-morris-marinas-door-handles/

Click to expand...

I was going to say Marina in my original question but thought I may have got slaughted for suggesting 110's had Marina parts like early Lotus Esprits,

Thanks for the pointer

What year is the landy?

Bloody hell that brings back memories. Marina door handles. Almost every Marina i did a PDI on had the door handle detached on the N/S rear door. Card had to be butchered to get door open, clip release cable into handle and fit new door card. We had dozens of them.

You have more chance of plaiting fog than getting parts for those doors, I have them on my 110 but also have a full set of antiburst locks and strikers to swop the lot if the pull handles or locks ever fail. I searched for almost a year trying to find striker pins for them as my doors came without, found one supplier with NOS on the shelf, wanted £50 per pin :0 , Good luck and as has been suggested try other BL suppliers if its just the handle needed, you may be lucky and be able to adapt slightly.

mojo247 said:

What year is the landy?

Click to expand...

1983