L322 Wheel Spacers

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
L

Land Ho!

New Member
Posts
180
Location
Surrey
Hi guys and girls.

Has anyone with an L322 ever put wheel spacers on their car? If so what were your expericences with them. Good or bad.
I was thinking about the ones from Terafirma but wanted to know if they are more trouble than they are worth?

Thanks.
 
Only reason to fit wheel spacers is if you fit wider wheels. The spacers return the wheel centre line to over the hub centre line. Fitting spacers just to widen the track makes you a Kevin with a Corsa type i am afraid. Also knackers your wheel bearings and alters the geometry.
 
wammers said:
Only reason to fit wheel spacers is if you fit wider wheels. The spacers return the wheel centre line to over the hub centre line. Fitting spacers just to widen the track makes you a Kevin with a Corsa type i am afraid. Also knackers your wheel bearings and alters the geometry.
Click to expand...

Well thats a matter of opinion. I think most would agree that an L322 is miles away from a "kevin with a corsa!"
I was thinking of getting them purely for the extra stability they provide. At the moment i have 22" with low profiles on which i hate. I want smaller wheels with some AT tyres on but they wont be as wide as the current tyres i have now, so i wanted to try and keep things the same with the spacers after i swap the wheels or wider if possible.

I don't mind about the wheel bearings. They can simply be replaced as needed. Just like any other part.
 
AT on a l322 ? Really ?
Not only are you going to ruin the looks, the ride will also be ****e
I once fitted AT to my freelander- never again
Makes road tyres feel Like heaven ! Lol
 
Land Ho! said:
Well thats a matter of opinion. I think most would agree that an L322 is miles away from a "kevin with a corsa!"
I was thinking of getting them purely for the extra stability they provide. At the moment i have 22" with low profiles on which i hate. I want smaller wheels with some AT tyres on but they wont be as wide as the current tyres i have now, so i wanted to try and keep things the same with the spacers after i swap the wheels or wider if possible.

I don't mind about the wheel bearings. They can simply be replaced as needed. Just like any other part.
Click to expand...


Ok get the widest spacers you can find. Widen the track and overload your steering gear sounds a brilliant idea. :D:D:D
 
2.0_hippo said:
AT on a l322 ? Really ?
Not only are you going to ruin the looks, the ride will also be ****e
I once fitted AT to my freelander- never again
Makes road tyres feel Like heaven ! Lol
Click to expand...

I can't use the road tyres off road which is what i want to start doing.
 
thought it was mine! said:
22's and low profiles on????mate should of bought a saxo with stripes now your talking wheel spacers do you wear a burberry baseball cap by any chance??
Click to expand...

What are you on about? Did you not read the part directly after that that said "i hate them"???

Learn to read before replying please.

I can't belive that people are taking what i have said the wrong way. I want rid of the low profiles and big wheels so i can take my 4x4 off road. Thats what it was made to do right? This is a 4x4 forum right?

Edit: spelling mistake
 
Last edited:
Land Ho! said:
What are you on about? Did you not read the part directly after that that said "i hate them"???

Learn to read before replying please.

I can't belive that people are taking what i have said the wrong way. I want rid of the low profiles and big wheels so i cant take my 4x4 off road. Thats what it was made to do right? This is a 4x4 forum right?
Click to expand...

It may have been better if you had said that in the first place. In my first answer i said you only fit spacers if you need to return the wheel centre line over the hub. That is if you fit new wheels with a different off set. You do not fit them just to widen the track. It puts the steering geometry out if you do that, and over loads the steering gear.
 
if you are serious about taking the L322 off road why not keep the 22's (or even change them for 20's or 18's) keep the road tyres for everyday and invest in a cheap set of steel wheels for your AT's.

M8 of mine has a L322 and he's gone for 18's with General Grabber AT's and although he takes it off road (nothing too extreme) the drive on road isn't brill
 
wammers said:
It may have been better if you had said that in the first place. In my first answer i said you only fit spacers if you need to return the wheel centre line over the hub. That is if you fit new wheels with a different off set. You do not fit them just to widen the track. It puts the steering geometry out if you do that, and over loads the steering gear.
Click to expand...

Hello mate. I thought it was pretty obvious really. Why else would i want to put AT's on it?! :D

The wheels on there at the moment are very wide. I'd imagine the off road wheels i get next wont be as wide. Which is one reason why i wanted to get the spacers, to keep it the same as it is now or wider if possible.

I put wheel spacers on both my Hilux and my Landcruiser and each of them had no problems for the 2 years i had them on. The Landcruiser needed a new CV joint at one stage but the Hilux didn't need anything done to it for 2 years when i eventually sold it. Both cars were much better off road when traversing over slanted hills and banks. At least in my opinion anyway. (Less chance of rolling)

Different cars are built differently. Which is why i wanted to hear from others with L322's who had already put spacers on their cars.

I don't really know anything about offsets etc, so i guess i will have to buy the new wheels first and then ask again? They will most likely just be smaller Land Rover wheels off another Range Rover is ebay alows it. :) The smaller the better i.e 17" with some bulky tyres like BFG's. They have always done me proud in the past. As for on road ride comfort, im not too bothered. Im sure the air suspension on the L322 will be more than adequate to cope with them. It will be what it will be. All i care about is taking this laptop off road to see what she can do!! :)
 
Hawaii said:
if you are serious about taking the L322 off road why not keep the 22's (or even change them for 20's or 18's) keep the road tyres for everyday and invest in a cheap set of steel wheels for your AT's.

M8 of mine has a L322 and he's gone for 18's with General Grabber AT's and although he takes it off road (nothing too extreme) the drive on road isn't brill
Click to expand...

Hello mate. Thats what i have planned. I will keep my current wheels for safe keeping. If the on road ride turns out to be diabolical i can always swap them over between off roading and on roading. Did you actually go in your mates car yourself? Was it "bad" or "ok"? It will be rather annoying if i have to keep swapping the wheels over everytime. Only one way to find out i guess. Thanks for the heads up though mate.
 
Land Ho! said:
Hello mate. I thought it was pretty obvious really. Why else would i want to put AT's on it?! :D

The wheels on there at the moment are very wide. I'd imagine the off road wheels i get next wont be as wide. Which is one reason why i wanted to get the spacers, to keep it the same as it is now or wider if possible.

I put wheel spacers on both my Hilux and my Landcruiser and each of them had no problems for the 2 years i had them on. The Landcruiser needed a new CV joint at one stage but the Hilux didn't need anything done to it for 2 years when i eventually sold it. Both cars were much better off road when traversing over slanted hills and banks. At least in my opinion anyway. (Less chance of rolling)

Different cars are built differently. Which is why i wanted to hear from others with L322's who had already put spacers on their cars.

I don't really know anything about offsets etc, so i guess i will have to buy the new wheels first and then ask again? They will most likely just be smaller Land Rover wheels off another Range Rover is ebay alows it. :) The smaller the better i.e 17" with some bulky tyres like BFG's. They have always done me proud in the past. As for on road ride comfort, im not too bothered. Im sure the air suspension on the L322 will be more than adequate to cope with them. It will be what it will be. All i care about is taking this laptop off road to see what she can do!! :)
Click to expand...

Fair do's but here is your first post which i replied to.

Hi guys and girls.

Has anyone with an L322 ever put wheel spacers on their car? If so what were your expericences with them. Good or bad.
I was thinking about the ones from Terafirma but wanted to know if they are more trouble than they are worth?

Thanks.

Sorry but my crystal ball is away for service. I would think that a spacer of 30 mm each side would make very little if any difference to rolling resistance.
 
Last edited:
Land

yep, I had a go in his L322 and with the 18's on with the grabbers (which were less than 4 months old) the ride was not as nice as my P38 on 18's with scorpions on. When he got it, it had 20's on and pirelli road biased tyres

It seemed to float a bit but he went for 255/60's and not 255/55's so the sidewall is a little deeper which might account for that and there was quite a load of noise from the tyres.

I haven't been in a L322 on standard road baised tyres so don't know for sure if the tyres have affected the ride but he's happy with them, can live with the noise (before the L322 he ran a 4.2 diesel landcruiser) and loves them off road

Horses for courses I suppose - He has kept the 20's as his plan is that when he comes to sell the L322 he'll put them back on (more sellable he says) and use the 18's & Grabbers on his next truck
 
You must log in or register to reply here.

Similar threads

Padda.116
L322 orginal parts please?
Replies
4
Views
584
backinblack
backinblack
W
l322 broken brake servo?
Replies
17
Views
1K
Mark Piercy
Mark Piercy
B
L322 Reservoir Valve.
Replies
12
Views
2K
Mark Piercy
Mark Piercy
M
L322 L322 stuck in extended height
Replies
2
Views
504
Blob
Blob
A
L322 Key stuck in ignition won't turn off
Replies
6
Views
926
alexr3546
A
Back
Top