L322 shift motor

Rallymantony · Sep 1, 2022

Hello peoples

Not been on here for ages due to one thing or another...... But now I'm back and I'm straight in with an urgent "can anyone help"topic..

A friend of mine has 2005 TD6, he's leaving for Italy on Saturday and he is in urgent need of a shift motor. Can anyone help? He's based just near Bluewater in Essex but he's willing and happy to travel.
Many thanks in advance
Tony

Mark Piercy · Sep 1, 2022

Rallymantony said:
Hello peoples

Not been on here for ages due to one thing or another...... But now I'm back and I'm straight in with an urgent "can anyone help"topic..

A friend of mine has 2005 TD6, he's leaving for Italy on Saturday and he is in urgent need of a shift motor. Can anyone help? He's based just near Bluewater in Essex but he's willing and happy to travel.
Many thanks in advance
Tony

Hi/low shift motor?
Is it stuck in low by any chance??

Rallymantony · Sep 1, 2022

Mark Piercy said:
Hi/low shift motor?
Is it stuck in low by any chance??

Thanks Mark, no the car keeps going in to failsafe, been told its probably this

marjon · Sep 1, 2022

Rallymantony said:
been told its probably this

Needs codes reading really it could be so many things. Does he get any message on dash?

J

Rallymantony · Sep 1, 2022

marjon said:
Needs codes reading really it could be so many things. Does he get any message on dash?

J

Just failsafe mode I believe, then locks itself in forth gear. Turns car off then restarts with no issues.
Thanks so much Mark

Mark Piercy · Sep 1, 2022

I'd have it diagnosed before your mate puts his hands in his pockets for nothing.

Datatek · Sep 1, 2022

Sounds more like imminent gearbox failure to me.

stuu · Sep 1, 2022

High low motor failure usually ends in select netural pinging up all the time,
You need codes read before guessing at a failsafe message,
You could be as lucky as a solonid in the box needing replaced so it wont select the desired gear or a loss of power too the ecu causing a gear malfunction to getting the horrors of pressure problems or incorrect gear ratios,

Mark Piercy · Sep 1, 2022

Datatek said:
Sounds more like imminent gearbox failure to me.

Ooh, you said it

L322 shift motor

Rallymantony

Active Member

Mark Piercy

Well fumbled member....

Rallymantony

Active Member

marjon

Well-Known Member

Rallymantony

Active Member

Mark Piercy

Well fumbled member....

Datatek

Well-Known Member

stuu

Well-Known Member

Mark Piercy

Well fumbled member....

Similar threads