Hello everyone,
I continue my journey to sort the issues I have with my 2006 4.2 S/C L322.
As my camera was missing (someone has opened the housing in a very inappropriate way and has cut it off) I bought a 18mm replacement as described in a thread in here previously and have successfully connected it.
I am still figuring out a correct position for it as I had to completely remove the old broken housing.
Anyway, camera works but the image is not how I want it to be. When going in the service menu and selecting the different options I have managed to settle it as I want in a Normal position (although in Wide 2 it’s a bit better), but as soon as I hit Reverse video changes and goes to something completely different which I don’t like at all.
Does it need to be coded to be in Normal or Wide 2? And if so does anyone know how?
I’ve attached images of how it looks.
Thanks in advance!
I continue my journey to sort the issues I have with my 2006 4.2 S/C L322.
As my camera was missing (someone has opened the housing in a very inappropriate way and has cut it off) I bought a 18mm replacement as described in a thread in here previously and have successfully connected it.
I am still figuring out a correct position for it as I had to completely remove the old broken housing.
Anyway, camera works but the image is not how I want it to be. When going in the service menu and selecting the different options I have managed to settle it as I want in a Normal position (although in Wide 2 it’s a bit better), but as soon as I hit Reverse video changes and goes to something completely different which I don’t like at all.
Does it need to be coded to be in Normal or Wide 2? And if so does anyone know how?
I’ve attached images of how it looks.
Thanks in advance!
Attachments
Last edited:
