L322 ABS intermittent fault

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

sds2919

New Member
Posts
4
I have an 06 Range Rover Vogue L322. The rear passenger side brake seized and over heated the hub very badly. The calliper was fixed but I am now having a problem with the abs. When braking to a stop the abs kicks in at the last 6 ft. It does not do it every time I stop but when it happens there is a noise from the brakes just as the car moves off. I have replaced the abs sensor on this hub but it did not fix it. Any advice on where to look next would be gratefully received.
 
from my dealings with this call it pedal judder just before comeing to a stop on all sorts of motors french /german even 6.5 ton iveco it always comes down to a wheel sensor being out of range ie wrong air gap or the abs ring toothed ring around the drive shaft being full of rust/mud so the sensor cant see the gap i have on one occ had a crack in the abs ring resulting in a loose fit and it spinning independently of the shaft have you had the car s diognostics read but it will not always show up as a fault
 
from my dealings with this call it pedal judder just before comeing to a stop on all sorts of motors french /german even 6.5 ton iveco it always comes down to a wheel sensor being out of range ie wrong air gap or the abs ring toothed ring around the drive shaft being full of rust/mud so the sensor cant see the gap i have on one occ had a crack in the abs ring resulting in a loose fit and it spinning independently of the shaft have you had the car s diognostics read but it will not always show up as a fault

Also include wheel bearing Last RR I did with this fault was the bearing although I couldn't feel any play.
 
Back
Top