Kiddie seat iso Fixings

Hi all

Just about to get my first discovery but have a problem
It is on a 'W' plate (1999).
Did they or do they come with ISO fixings in the rear seats (for child seat) or can you get the parts to fit them?
I apologize if this has been asked before but couldn't see it when I searched.

Cheers

Can't see anything mentioned in my sales brochures for 1999 -2004MY even the baby seats shown as for lap diagonal belt fitting.

My 2001 Y reg has them.

This is what is stated in your owners hand book, so looks like they are/were an option.

Fitting ISOFIX child restraints.

ISOFIX child restraints should only be fitted in the two outer seating positions of the second row seats.
Anchor bars built into the rear seat frame enable the ISOFIX restraints to be securely attached to the vehicle seat in these positions only.
The anchor bar locations are shown in the illustration above.
When fitting ISOFIX child restraints, always follow the instructions supplied by the manufacturer of the restraint.
Once the ISOFIX restraint is installed, you are recommended to test the security of the installation before seating the child.
Attempt to twist the restraint from side to side and to pull the restraint away from the vehicle seat; then check that the anchors are still securely in place.

Thanks for checking for me but after reading similar threads on here I just bought another seat.
The disco I had my eye one was to nice to pass on over a baby seat lol