Disco 2 Keyfob dead, any ideas
- Thread starter MJI
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 2,061
- Location
- Hertfordshire
Have you taken the case off to check the actual micro switch is still soldered to the circuit board or the board tracks have not corroded ? One of my keys had a 'good' switch but had come adrift of the board. Do you have a spare key, if so is that OK?
Of course, no broken tracks, nothing I can see dislodged. Other key is OK.
Cleaned with IPA,, mechanically looks fine, only have a reflow left to try.
My plan is to buy a couple off Ebay, refurbish and get them coded to my D2.
Is this workable, what kit do I need?
Can a D2 recognise 3 fobs so I could not lose my working one?
If nanocom required, any near me? Will read ACE codes with my Hawkeye if required.
Is this workable, what kit do I need?
Can a D2 recognise 3 fobs so I could not lose my working one?
If nanocom required, any near me? Will read ACE codes with my Hawkeye if required.
sierrafery
Well-Known Member
- Posts
- 17,905
- Location
- Arad/Romania
see this https://www.remotekey.co.uk/shop/la...overy-ii-discovery-series-2-1999-to-2006-key/ + i inform you that you can program 4 fobs but only with nanocom
