Key 1 Wont unlock/Lock P38??

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P38 DUB

P38 DUB

New Member
Posts
192
My key fob hasn't been working very well recently (i have to stand really close to the car,press it a couple of times before it works, havent tried changing the batteries but normally the car tells you if the batteries are dying) so i thought id start using key fob 1, see if that works any better (an it looks almost brand new) but it wont unlock an lock the car??

It starts it fine an deactivates the immobiliser, and the little light flashes when i press the button, so i have no idea.

I thought that the fobs resync every time you start the engine so theres no need to press any fiddly button nonsense, am i right?

Anyone got any ideas??
 
According to Rave for NAS Spec (North American Spec), if the car is unlocked, press the lock button and lock the car with the key. Vice-versa if the car is locked. But mine's a 98 and I'm sure it re-synched the spare key by inserting it into the ign. Not at home at the moment so can't try anything or check the handbook.

Another thread -


98 was the year when they changed the synching I believe. Could be either way described. The other way is to do the 4 times trick which is, key in lock and holding the lock button, turn the key to lock then back to vertical, release button, press unlock and turn to unlock position, return to vertical and release button. Repeat four times and that should be it. We have a 97 and a 2000 model which do it DW's ways respectively and used to have a 1998 which did it the third way as I have described. Try all three.
 
I recognise that quote above!!

A problem I have, even doing all the synching is that if I do one key it locks out the other. I resynch it and the other one stops working and vice versa......
 
thanks ill give them i try i always thought you could have two keys working together cause if you unlock the door with one the memory seats go to that position along with the mirrors an stuff. well thats what is says in the manual anyway.

Ill try that way inabit an let you know.
 
P38 DUB said:
thanks ill give them i try i always thought you could have two keys working together cause if you unlock the door with one the memory seats go to that position along with the mirrors an stuff. well thats what is says in the manual anyway.

Ill try that way inabit an let you know.
Click to expand...

On the year 2000 DHSE I'm sure it say's a max of 3 keys. I have Key 1 and Key 2 and both work fine:D
 
Well all I had to do was put the key in the lock holding the lock button
and turn it to lock an it flashed a couple of times an now works fine thankyou
cheers
 
Glad it worked. The thing about mine is the link rod attachment inside the drivers door between the key hole and the lock actuator is broken so I cant do the key turn trick until I put a new handle on. £40 from main dealer so I'd best get round to it next week.
 
All P38's come with a maximum of 4 keys numbered 1-4. I have 3 keys one works great the other 2 have problems, so I've only got the chance of ordering 1 more key. So I may have the car running for another 8 years of key life if I dont drop dead or the block gives way . Dealer price should be around £110 and should re sync no probs.
 
Willos said:
All P38's come with a maximum of 4 keys numbered 1-4. I have 3 keys one works great the other 2 have problems, so I've only got the chance of ordering 1 more key. So I may have the car running for another 8 years of key life if I dont drop dead or the block gives way . Dealer price should be around £110 and should re sync no probs.
Click to expand...

You can replace a dead FOB 1 to 3 no problem, the problem comes if you have one key and don't know which number it is as you take the chance that you will get another of the same number then only one will will synch.
 
You must log in or register to reply here.

Similar threads

MrGorsky
P38A Occasional "Engine Disabled Press Remote" message on dash.
Replies
19
Views
1K
Datatek
Datatek
M
Central lock
2 3 4
Replies
74
Views
2K
mikkre
M
Ola66
L322 2007 Vogue SE 3.6TDV8 Doesn't recognise key fob, can't turn key in ignition or turn off alarm!
Replies
5
Views
835
Graculus
Graculus
Maat
P38A Door lock not working
Replies
3
Views
823
Maat
Maat
feyniriel
P38 engine disabled for no reason, please help!
Replies
5
Views
1K
pwood999
pwood999
Back
Top