Datatek
Well-Known Member
- Posts
- 43,954
- Location
- Near Poitiers SW France
He has but it's incomplete
P38A It is shut you git!!
- Thread starter Mark Piercy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 12,141
- Location
- Sud ouest France !
Tis missing bits sir...
Mukiwa
Well-Known Member
- Posts
- 469
- Location
- Winsford, Cheshire, near Oulton Park
Get stuff delivered to my house if you want mate and collect when you are passing and I'll get you cash & carry Bourbons as well
- Posts
- 12,141
- Location
- Sud ouest France !
Cheers Shaun, that's very kind of you. How about a gearbox!??Get stuff delivered to my house if you want mate and collect when you are passing and I'll get you cash & carry Bourbons as well
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
That's one thing I haven't got in my garage,hang on I have, it's a manual in bits so no good for you.Cheers Shaun, that's very kind of you. How about a gearbox!??
Mukiwa
Well-Known Member
- Posts
- 469
- Location
- Winsford, Cheshire, near Oulton Park
Unfortunately my old gearbox is in Ipswich, I bartered the value against the fitting cost of the HP24. I do however have a spare M51....
- Posts
- 12,141
- Location
- Sud ouest France !
The door issue has buggered off!!
The compressor is doing well tho
The compressor is doing well tho
- Posts
- 66,499
- Location
- The Wooly Witch
The door issue has buggered off!!
The compressor is doing well tho
Can you adjust the switches ?, we use a similar type at work and adjust, then superglue them to set them ....
Sounds like yours change with temperature so a thou or so may make them not function ...
- Posts
- 12,141
- Location
- Sud ouest France !
Good moaning!
The issue came and went in one evening, I can't help thinking it was humidity related and I'm not convinced it's the end of it but fingers crossed for the moment
Datatek
Well-Known Member
- Posts
- 43,954
- Location
- Near Poitiers SW France
Still sounds like a bad earth if it's humidity relateed.Good moaning!
The issue came and went in one evening, I can't help thinking it was humidity related and I'm not convinced it's the end of it but fingers crossed for the moment
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Did you take the door card off Mark? I take it you checked the connector plug/s the older latches have two one purely for the ground.make sure they're clipped out of the way of the window regulator.if you have the later latch does the loom connect directly to it or has it got a small loom as part of it? I've got a box of latches in the garage which I was going to send to Marty until Covid hit I could have a look later,got to take the Boss to the Doc's now. Check the earthing points, which I'm sure you have done.
- Posts
- 12,141
- Location
- Sud ouest France !
When I get a moment, I'll check my newly Installed rave and go searching
- Posts
- 12,141
- Location
- Sud ouest France !
I've not been near it tbh Alan, but your suggestions amongst others fall not upon deaf ears
Thanks for your help peeps
Similar threads
