It’s Broken!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Crimbo1990

Member
Posts
14
Location
hull
Afternoon ladies and gents,

I’ve recently got a 110 pickup crew. Done a few jobs on it my self I’m not a mechanic in any way,shape or form. I just enjoy tinkering with the old gal!! This one has me stumped. Went to take out for a drive and when I turned the ignition key nothing at allhappened, and I mean nothing no dash lights no trying to turn over I can’t buy any lights on or beep the horn. NOTHING!! I assumed the battery had gone dead as she had been stood a while but I charged the battery and still nothing! Any advice will be much appreciated. Try and keep it idiot proof though as I say I’m no way near amechanic.

Thanks in advance.
 
Is there a battery isolation switch anywhere? Trace the battery positive cable from the battery to the starter motor.
 
Yes it did work, I have disconnected the battery befor to give it a charge as it does not get used as a daily.

If the battery terminals and earth connections are good, it could be ignition switch failure. The ignition switch behind the key is only two plastic discs, with metal terminals inset in the discs. They can fail through wear, or dirt in between the contacts.
 
If the battery terminals and earth connections are good, it could be ignition switch failure. The ignition switch behind the key is only two plastic discs, with metal terminals inset in the discs. They can fail through wear, or dirt in between the contacts.
Once I’ve checked the terminals. I’ll look in this. Is this an easy fix?
 
Back
Top