Trilly909
Member
- Posts
- 65
- Location
- Hook, hampshire
http://s1058.photobucket.com/albums/t407/Trilly909/Land%20rover%2090/?action=view¤t=IMG_0428.jpg
is this the axle breather
- Thread starter Trilly909
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
http://s1058.photobucket.com/albums/t407/Trilly909/Land%20rover%2090/?action=view¤t=IMG_0428.jpg
SCOTSMAN
Well-Known Member
- Posts
- 1,982
- Location
- Aberdeenshire
Dont be silly the thing on left is a tyre!!
tottot
Well-Known Member
- Posts
- 7,497
- Location
- west wales coast
Not either of the above but not anything I have seen on a landy axle before,however its where the breather tube should be.
elsie
Well-Known Member
- Posts
- 1,300
- Location
- the very wonderfull Conwy Valley
On the LEFT , it's a shock absorber !!!!
RAGNAR BENSON
New Member
- Posts
- 770
- Location
- Surrey
That chassis looks a bit scabby 
Trilly909
Member
- Posts
- 65
- Location
- Hook, hampshire
The chassis is in pretty good nick for 20 years old and the diff has seen better days
And you know what bit I mean
And you know what bit I mean
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
thats not supposed to be there ,but breather pipe should be
Trilly909
Member
- Posts
- 65
- Location
- Hook, hampshire
Oh do you know what it is? And would this be why oil is leaking out of front seal?
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
looks like a concertina sealant bottle but hard to see clearly ,do you mean seal for diff flange that prop bolts to ,it could leak through worn seal ,worn/grooved flange ,play in pinion bearings letting flange move
DiscoPol
Well-Known Member
- Posts
- 6,376
- Location
- The Land of Po
ha ha that all looks well nasty
Trilly909
Member
- Posts
- 65
- Location
- Hook, hampshire
Need to put some diff guards on it to hide it but hopefully by the end of the year I will completely restore it
but hopefully by the end of the year I will completely restore itSimilar threads
