Is this correct??

Guys I am attaching some pictures of my 2.5NA with an LT77 gearbox. Just where the clutch meets the gear box, there is a threaded hole and from that there is an oil leak.

[/URL][/IMG]


Also there is another hole that is threaded near the bottom pulley. Am not sure if these are supposed to be plugged with something like a bolt or cover, but from this one too some oil is leaking. Any help will be appreciated.
Thanks

it is the excess oil drainage holes - yu only need to plug them if you are wading - or more precisely if your landrover is going wading. You then fit wading plugs into these holes.

The Mad Hat Man said:

it is the excess oil drainage holes - yu only need to plug them if you are wading - or more precisely if your landrover is going wading. You then fit wading plugs into these holes.

Click to expand...

Thanks for the info, but everytime I use the Landy and park it I see a lot of oil dripping especially from the one near the gearbox.

I would think, in my humble opinion, that yu may have a buggered rear crankshaft oil seal.

The Mad Hat Man said:

I would think, in my humble opinion, that yu may have a buggered rear crankshaft oil seal.

Click to expand...

I even more humbly concur !

I agree but I'm foooked if I'll be humble about it