Internal bulkhead

R1nut · Feb 3, 2018

Is there such a thing as an full internal bulkhead for a 90?
I have a td5 90 sw and have a half height bulkhead but need a full one, I could board it but would rather a proper one if there is such a thing!

Flossie · Feb 3, 2018

Never heard of one myself.

R1nut · Feb 3, 2018

I thought as much, couldn't find anything on the tinterweb
Ply it is then

tottot · Feb 3, 2018

If it does not need to be solid you could use a mesh aftermarket dog guard,just ban idea.

R1nut · Feb 3, 2018

That's what I already have.
It has to be a solid sealed unit, I was hoping not to have to get a van.
Thanks for the replays so far

mick the builder · Feb 4, 2018

Wouldn't be too difficult to cut from a sheet of ally cheq

tottot · Feb 4, 2018

There may be a fabricator that could make one from galv sheet or make it yourself starting with a cardboard template if you have the skill.

R1nut · Feb 4, 2018

That's a good shout, I'll have a play about and see what I can do

nobber · Feb 4, 2018

You can buy them, last time I checked they were damn expensive.

nobber · Feb 4, 2018

They are a genuine only part from LR.

R1nut · Feb 4, 2018

I bet they are expensive then!!!

nobber · Feb 5, 2018

Yup, and they are , or were actually called a bulkhead, the bit we normally call a bulkhead is actually called a dash assembly or dash panel assembly. They come in at between 2400 and 3k and the guy at LR told me the bulkhead was more expensive. This was a good 10 years ago though.

Internal bulkhead

R1nut

Member

Flossie

Well-Known Member

R1nut

Member

tottot

Well-Known Member

R1nut

Member

mick the builder

Well-Known Member

tottot

Well-Known Member

R1nut

Member

nobber

Well-Known Member

nobber

Well-Known Member

R1nut

Member

nobber

Well-Known Member

Similar threads