Disco 2 Interior lights

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

davec18

Member
Posts
36
Location
Cornwall
Hi my interior cabin lights have stopped working when opening doors but they work ok if turned on on the switch any ideas please
 
Hi a common issue is corrosion in connector C0484/0102, the wire for courtesy lights is purple pin 13 but i've seen cases when it was in other cavity

C0484.jpg
 
Have you taken the headliner off at some stage??
If you have! Check the cables are connected!
Had similar, and could not for the life of me find out the problem! And as the otherhalf says! Your doing the 'Man' search????
Rechecked! And realised I had not connected the Earth cable on the front cabin light!!
Just an idea!!
 
checked out both of these sugestions but still not working on opening the door but the light works if I switch on manualy ??
 
checked out both of these sugestions but still not working on opening the door but the light works if I switch on manualy ??
If you let one door(no matter which one) open and lock with fob do you hear the misslock audible warning(short horn sound)? If not it means that the warning is disabled and one of the door switches is stuck closed so for the BCU a door is permanently open and it doesnt activate the courtesy lights... if you get misslock warning means that there's a problem on the earth path from the BCU to the lamps somewhere else than the header i pointed and to find it you must know how to troubleshoot that based on the diagram... unless it's a BCU fault
 
Back
Top