Induction Cleaning

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
rasheed

rasheed

Well-Known Member
Posts
1,815
Location
Bangladesh
Hot topic on the US forums these days is induction cleaning. Basically the fuel path and injectors as far as I can follow, and its all the rage to get it done professionally while pooh poohing DIY additives. What do we think about that then?
 
rasheed said:
Hot topic on the US forums these days is induction cleaning. Basically the fuel path and injectors as far as I can follow, and its all the rage to get it done professionally while pooh poohing DIY additives. What do we think about that then?
Click to expand...

Sounds like a good money maker if you can get somebody stupid enough to pay you to do it. Some off the shelf injector cleaners work pretty well actually. If you put them in when tank is low, as opposed to the add to a full tank instruction, the difference is quite noticable.
 
wammers said:
Sounds like a good money maker if you can get somebody stupid enough to pay you to do it. Some off the shelf injector cleaners work pretty well actually. If you put them in when tank is low, as opposed to the add to a full tank instruction, the difference is quite noticable.
Click to expand...

A couple of years ago (on another forum) I read recomendations to simply add a litre of methylated spirit to the tank occasionally. Any comments from this forum?
 
norseman said:
A couple of years ago (on another forum) I read recomendations to simply add a litre of methylated spirit to the tank occasionally. Any comments from this forum?
Click to expand...

Don't know about the Meths but have heard of adding a little Acetone to diesels or a moth ball in petrol engines believe it or not.
 
well iv added a bottle of redex to a full tank an it really didnt do any thing noticable. are they just a waste of money or do they do somthing.
 
Datatek said:
I hate to think what meths or, even worse, acetone could potentially do to the seals in the injector pump.:eek::eek:
Click to expand...

More than likely not a lot in very dilute quantities. I am sure i have seen Acetone as one of the ingredients in Diesel injector cleaner. Since the advent of unleaded petrol seals and pipes are now made from synthetic rubber as the additives in it destroyed normal fuel lines. Diesel seals are more than likely no different. Not that i am thinking of pouring a gallon of Actone in any time soon. But an egg cup full might do the trick, but let someone else try it first. After hearing the moth balls tale many years ago, to my great surprise Mythbusters did recently prove they actually worked in petrol engines, appearing to increase the octane rating.
 
eightinavee said:
Yankee snake oil.:D
Click to expand...

Maybe, but lots of things are discovered by accident. Like when one of Francis Bearts mechanics accidentally fitted a under sized inlet gasket to the carb on a Manx Norton and got a silly increase in power because of the turbulance it caused. Not all old wives tales are fictional.
 
P38 DUB said:
Mothballs??

some one care to enlightin me?
Click to expand...

Once upon a time my old grandpappy told me that in the war because the petrol you could get was ****, he used to put moth balls in his petrol tank and the car ran better. Mythbusters tried this and the end result was the engine appeared to run better with them, than it did without them. It apparenly improves the octane rating. Don't ask me why, but it does appear to work. Maybe you could try it and let me know how you get on. Repair bills to Mythbusters Co Discovery channel.
 
wammers said:
Maybe, but lots of things are discovered by accident. Like when one of Francis Bearts mechanics accidentally fitted a under sized inlet gasket to the carb on a Manx Norton and got a silly increase in power because of the turbulance it caused. Not all old wives tales are fictional.
Click to expand...
Thank you for that,always prefered the 500T myself.
 
Some of the guys on the bio forum use acetone as a cetane booster...not sure of quantities but dont think its a lot....asfor the rubber componants most made after 98 ish should be made of Viton so are fine with just about anything thrown at them.:)
 
Well I tried it. Friend gave me a pair of tablet-form injection cleaners that you drop into the tank before filling. Used 1 with just 20 litres of fuel and when that was consumed popped in the second with 40 litres. It really does seem to have made a difference. The car runs smoother and definitely has more zip. I used Dyno-Tab Plus injection cleaners from the US.
 
rasheed said:
Well I tried it. Friend gave me a pair of tablet-form injection cleaners that you drop into the tank before filling. Used 1 with just 20 litres of fuel and when that was consumed popped in the second with 40 litres. It really does seem to have made a difference. The car runs smoother and definitely has more zip. I used Dyno-Tab Plus injection cleaners from the US.
Click to expand...

More than likely a very expensive form of Moth Ball.
 
inject some redex into the cylinders when you do a plug change,let it soak for 15/20 mins then fire it up see how much crap comes out the back end,i done it a while ago on a mates car,reckons it runs better now than when he bought it 3 years ago;)
 
You must log in or register to reply here.

Similar threads

B
Freelander 1 Automatic M47 smoking black smoke
Replies
0
Views
713
balkan estates
B
O
Engine Oil Additives - Running Lean
Replies
10
Views
831
Quixote
Quixote
D
FL1 TD4 warm start issues
Replies
3
Views
1K
Arctic2
Arctic2
J
Diesel or PHEV
2
Replies
27
Views
2K
backinblack
backinblack
tyregeezer
2.7 tdv6 Jag to LR3 differences
Replies
7
Views
1K
tyregeezer
tyregeezer
Back
Top