Reecebevan12
New Member
- Posts
- 4
- Location
- Kent
After some help boys and girls!
I recently bought a 1999 disco 2 off roader which needs some attention. The right front indicator wasn't working so decided to order 2 new complete sets. Once I took them off I realised the previous owner had broken the plugs like connect to the bulb holder and he had grommeted a new piece of wire onto the main cable, then soldering the wire to the holder pins.
I don't have a solding iron so just hard wired them making sure they didn't cross. Checked them and they worked. Then, nothing. Both indicators don't work. Hazards won't work. And if you turn on indicator or hazard it flashes once on the dash and that's it. But nothing out of the bulb.
Fuses look fine. And relays don't look burnt out. I'm not too good with cars so any help would be great!
I recently bought a 1999 disco 2 off roader which needs some attention. The right front indicator wasn't working so decided to order 2 new complete sets. Once I took them off I realised the previous owner had broken the plugs like connect to the bulb holder and he had grommeted a new piece of wire onto the main cable, then soldering the wire to the holder pins.
I don't have a solding iron so just hard wired them making sure they didn't cross. Checked them and they worked. Then, nothing. Both indicators don't work. Hazards won't work. And if you turn on indicator or hazard it flashes once on the dash and that's it. But nothing out of the bulb.
Fuses look fine. And relays don't look burnt out. I'm not too good with cars so any help would be great!
