Immobiliser ring trouble on freelander1

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P

PHILcrank2021

Member
Posts
13
Location
Togo
Hi guys. My freelander1 td4 2003 diesel can't start. When the Key IS in the contact and l turn it to start the car. Nothing happened. But when I insist and maintain the Key on start position for about 20s then the ingine runs but doesn't start. I check with OBD 2 but no defaults. Some says the immobiliser ring IS not working well. Please Can someone help me?!
PS. Usually when I turn the Key in contact it takes less than 1s toi start quickly.
Thanks
 
Do the dash lights come on as normal before ypu turn the key to crank?

When you lock the car there is an led that flashes on the dash. What does this do when you turn the key to crank? If it lights up solid the car is immobilised.
 
GrumpyGel said:
Do the dash lights come on as normal before ypu turn the key to crank?

When you lock the car there is an led that flashes on the dash. What does this do when you turn the key to crank? If it lights up solid the car is immobilised.
Click to expand...


The dash lights Come as normal when I turn on the Key in the crank.
The led flashes when I lock the car as usual but doesn't do anithing when I turn the Key in the crank
 
The dash lights Come as normal when I turn on the Key in the crank.
The led flashes when I lock the car as usual but doesn'tdo anithing when I turn the Key in the crank
 
PHILcrank2021 said:
The dash lights Come as normal when I turn on the Key in the crank.
The led flashes when I lock the car as usual but doesn't do anithing when I turn the Key in the crank
Click to expand...
The dash lights should come on and do their self test when you turn the key to the "ignition on" position. Pretty sure they go out while you then turn it to crank.

But if that flashing light does not illuminate continuous when you turn to crank, then the car should not be immobilised.

Worth getting thoughts of others, but I'd query the ignition switch - the round plastic switch that fits to the end of the ignition key barrel.
 
Alteredtech said:
Immobiliser ?

When cranking do you hear the starter motor ?

When cranking what light are still on ?
Click to expand...
Alteredtech said:
Immobiliser ?

When cranking do you hear the starter motor ?

When cranking what light are still on ?
Click to expand...
Yes the starter runs when cranking but not immediately when I turn on the Key in the crank. I have to wait for several several seconds before the starter runs. Usually when I turn the Key on the starter runs automatically. It looks like the calculator doesn't receive correctly the signal from the key
 
GrumpyGel said:
The dash lights should come on and do their self test when you turn the key to the "ignition on" position. Pretty sure they go out while you then turn it to crank.

But if that flashing light does not illuminate continuous when you turn to crank, then the car should not be immobilised.

Worth getting thoughts of others, but I'd query the ignition switch - the round plastic switch that fits to the end of the ignition key barrel.
Click to expand...
The flash lights Come on and their self test IS ok.
 
Hello,

So the car doesn't start at all !
Before suspecting an immobiliser issue, we need some evidence.

When you put your key on starting, do you hear a click from the starter ?
So when the starter is running, does it run painfully or like it should ?
Did you tried to jump start the vehicle to be sure it's not a battery issue.
 
Alteredtech said:
Hello,

So the car doesn't start at all !
Before suspecting an immobiliser issue, we need some evidence.

When you put your key on starting, do you hear a click from the starter ?
So when the starter is running, does it run painfully or like it should ?
Did you tried to jump start the vehicle to be sure it's not a battery issue.
Click to expand...
Hi
The car doesn't run at all now. But when the trouble happens first Time I insist and maintain the Key on start position about 20s then the engine runs and the car starts. Now After 20s the starter runs fine and the motor runs but the car doesn't start. Usually when I put the Key in the start position the starter runs automatically the engine runs and the car starts. I replace the battery


PS. Now the starter doesn't rien automatically and si does the engine and the car doesn't start
 
Now the starter doesn't run automatically when the Key IS maintained in start position. So does The engine and the car finally doesn't start
 
If it doesn't crank in the start position, then it's most likely to be the ignition switch, which are known to suffer contact burning, due to the grease becoming hard.
 
PHILcrank2021 said:
Hi guys my freelander 1td4 2003 IS still not running. It seems to be now a problem of ecu and start box files which are corrupted. Can anyone send me working files or tell a solution?
Thanks
Click to expand...

For an ECU, you need to find professionnel that can repair it or replace it, you can’t do it yourself. Don’t touch that thing if you doesn’t have the knowledge.

What tells you that the issue is with ECU ?
 
Last edited:
You must log in or register to reply here.

Similar threads

M
Trouble starting freelander 1 td4
2
Replies
23
Views
3K
Nodge68
Nodge68
P
Light on Glow plugs problem
Replies
17
Views
1K
PHILcrank2021
P
P
Immobiliser - car not starting intermittently
Replies
3
Views
1K
Stanleysteamer
Stanleysteamer
K
L322 not starting
Replies
11
Views
2K
backinblack
backinblack
C
2-button fob immobiliser problems, again
Replies
3
Views
2K
Al2O3
Al2O3
Back
Top