Hi, so I have a new Discovery 1994 which has a Cat1 alarm/immobiliser fitted (Hornet 750t)
I have been away for 2 weeks and when I got back the battery had run flat, I have since charged it however the starter motor does not turn. The alarm seems to be working ok, locks and unlocks the doors however the hazards continually flash.
The starter motor does not turn and I cannot hear the solenoid click.
I am guessing that the alarm needs resetting however I cannot find the manual for it anywhere online.
I will get the meter out tomorrow and see if there is power going to the solenoid however is there anything obvious I should be looking for?
Thanks in advance
Rob
Also looking for somewhere near Peterborough to do some bodywork repairs, boot floor and wing... Any suggestions?
I have been away for 2 weeks and when I got back the battery had run flat, I have since charged it however the starter motor does not turn. The alarm seems to be working ok, locks and unlocks the doors however the hazards continually flash.
The starter motor does not turn and I cannot hear the solenoid click.
I am guessing that the alarm needs resetting however I cannot find the manual for it anywhere online.
I will get the meter out tomorrow and see if there is power going to the solenoid however is there anything obvious I should be looking for?
Thanks in advance
Rob
Also looking for somewhere near Peterborough to do some bodywork repairs, boot floor and wing... Any suggestions?
