immobiliser, central locking, rear window not starting

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

SeadooLandy

New Member
Posts
2
Hi all,

Be gentle with me as i am a newbie to the forum!! Having read loads of info about our Freelander problem I wanted to be more specific and see what next cause of action to take. Currently we have a 1998 freelander, 3 door 1.8 k series petrol, been great so far as we throw all the stuff in, take it to the beach with the kids in, have a great day then park her up for the night:) Problems occured when the battery in the 'fob' started to go, as central locking would work intermittently so replaced the battery, re-synchronised the fob and all worked well.......until last week. The car had been left for a couple of weeks and i tried the fob to open the car and nothing, so opened the car with the key but the immobiliser light stayed on the dash, so tried re-synchronising but nothing worked....now central locking not working. I have located the CCU and taken it out cleaned it and put back ensuring all contacts are made etc... Alarm is working as when I open the bonnet it sounds the horn as usual and can only be cancelled by the key operation in the door:mad:..............any ideas anyone...... thanks
 
Disconnect the main battery the reconnect it. Try to re-sync the fobs to open/unlock it. Also turn the key in the ignition as the will auto unlock it if it's locked. You seem to have a lot of electrical problems. Is the battery charged with good electrical contact to wires?
 
HI and thanks for the information. Apologies not got back sooner but been away with the Freelander. I have done all you have said and I think I have narrowed the problem down to the immobiliser receiver in the ignition barrel as sometimes the immobiliser goes out and all is fine; sometimes i have to split open the key fob and hold the transmitter close to the receiver and when the ignition is turned on the central locking opens up and the light goes out!! I am thus thinking of replacing the receiver coil around the ignition barrel - is this something you would recommend or will there be sync issues if i replace?? Thanks for your help.:):)
 
Back
Top