I'm going to pour loads of oil into my chassis.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Why not pump it full of grease, it won't run out so easily....;).......tongue in cheek!
 
Last edited:
potus said:
Why not pump it full of grease, it won't run out so easily....;)
Click to expand...
Until it gets hot and folk think you have shat yourself and you kill some poor bugger behind you.

Oil would just pee out... Grease would be difficult to get in, hence anything in between is pretty much waxoil.
 
Well, if you're actually going out to buy stuff, you might as well buy the proper stuff I'd have thought. After all, the recipes for Waxoyl, Dinitrol et al have been designed so they'll stick on for a while, whereas ordinary oil tends to run off, dry off or otherwise make itself scarce after a short time. It's OK if you're just getting rid of the result of an oil change - 'oh well, I'll just pop it in the sprayer and spray it through the holes in the chassis' - but if you're buying, get something decent. After all, it's not much in relation to the price of a Richards, Marsland etc.
 
nobber said:
Instead of faffing around with waxoyl, any cheap oil recommendations?
Click to expand...

If I was going to do that, I would use used gear oil, no combustion by-products. Good gear oil, not been in for 100k and full of water.

As suggested, it will p!ss out pretty quick, try using epoxy putty to make little plugs to block up the drain holes. Remove after a while when the stuff has spread around.
That's what I do with dinitrol.

May save having a fleet of environmental health people following you around as well.
 
I've been seeing that some in America recommend chain saw / chain oil, as it doesn't fling off easily, its quite cheap bought by the gallon. I use a chain oil spray around the garden tools, bikes, locks n stuff, it really does stick well.
 
I wouldn't be driving it around with oil ****ing out of it. I just think it would be better than waxoyl as its runny and will soak well into the rust inside the chassis.
 
christi1 said:
I've been seeing that some in America recommend chain saw / chain oil, as it doesn't fling off easily, its quite cheap bought by the gallon. I use a chain oil spray around the garden tools, bikes, locks n stuff, it really does stick well.
Click to expand...
I've heard that chain oil is good
 
christi1 said:
I've been seeing that some in America recommend chain saw / chain oil, as it doesn't fling off easily, its quite cheap bought by the gallon. I use a chain oil spray around the garden tools, bikes, locks n stuff, it really does stick well.
Click to expand...

That's a good idea too. It does stick to metal well.
 
I just can't be done with the mess - rather get done properly and let someone else clear it all up. Guy I'm going to knows his stuff, has a good reputation and whilst not the cheapest I work on the principle of you get what you pay for.

Looking forward to getting it sorted.
 
You must log in or register to reply here.

Similar threads

D
Disco 2 1/2 chassis replacement.
Replies
19
Views
745
Daviehilltown
D
T
200tdi oil coming out of air filter box. Help!!
2
Replies
28
Views
1K
landowner
landowner
P38Seb
P38A Protecting my undercarriage..
Replies
14
Views
1K
kermit_rr
kermit_rr
M
D2 - TD5 - sudden oil consumption increase
Replies
17
Views
1K
Malawi_Disco_2
M
Sulcalibur
Oil in coolant reservoir
Replies
4
Views
316
Nodge68
Nodge68
Back
Top