Ignition lights but no ignition ???

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Pod51

New Member
Posts
112
Location
Not where Fanatic Thinks ...
Could do with some advice here.

Just gone to start my 300tdi 110 and I turn the key through to position 2 to warm the glow plugs. Once they have warmed up I turn to position 3 to fire the Landy up and there is absolutely nothing hapening, nowt !! All lights stay on as they should but there is nothing from the cranking position on the ignition.

There has been warning of this happening with zero problems on the ignition until this infuriating moment.

Any ideas to whats wrong ??
 
Could do with some advice here.

Just gone to start my 300tdi 110 and I turn the key through to position 2 to warm the glow plugs. Once they have warmed up I turn to position 3 to fire the Landy up and there is absolutely nothing hapening, nowt !! All lights stay on as they should but there is nothing from the cranking position on the ignition.

There has been warning of this happening with zero problems on the ignition until this infuriating moment.

Any ideas to whats wrong ??

Dodgy fly leed connection to starter motor, fooked starter motor, dodgy ignition switch or realy or dodgy alarm spider.;)

start with wiggling the fly lead
 
All fixed thanks to your pointers. Starter motor was ****ing about so as buster would say "Gave it a few chaps" and it was fixed. I wouldn't have thought about the starter myself , I would have gone for ignition switch but starter it was.

Ta muchly.
 
Back
Top