Idle adjustment issue

Hey guys....I have recently bought a 300tdi engine from turner engineering...since then I have increased the fueling from the smoke screw and the main fuel screw....but the idle has increased to over 1000rpm in gear....is there any way to drop it to 750rpm. Thanks in advance

It increases slightly when warm, assuming its anything the original,

You can change the idle screw, but it should be painted over by LR when leaving the factory as theres generelly no need to alter it,

maybe ask Turner engineering what they think

Jonnyb1990 said:

It increases slightly when warm, assuming its anything the original,

You can change the idle screw, but it should be painted over by LR when leaving the factory as theres generelly no need to alter it,

maybe ask Turner engineering what they think

Click to expand...

Currently it's idling at 1200 rpm in gear....

auto or manual ?

Auto has some computer input i think

Jonnyb1990 said:

auto or manual ?

Auto has some computer input i think

Click to expand...

Auto....but mine has no computer

Need to sort mine too, had to fuel to max to suit the new turbo conversion and the idle screw is turned down and no longer touching the arm any ideas the arm the throttle cable fits to seams to be in two pieces and seams adjustable.

Got mine sorted yesterday...adjusted the throttle cable down to reduce idle

danspann said:

Got mine sorted yesterday...adjusted the throttle cable down to reduce idle

Click to expand...

Will try that in the morning rushed out after altering the screw and didn't have time to look further ,will be chuffed if it sorts it don't want to mess about with the relationship between the plates on the lincage ,though I could mark it up with a scribe I suppose.