Is that a new word in the Cambridge dictionary?Noted, I shall refrain hereafter..
He's still a cockwomble though..![]()
Eye spy with my little eye...........
View attachment 348211View attachment 348212View attachment 348213View attachment 348214View attachment 348215View attachment 348216
Just hate seeing lovely old vehicles kept like thatEye spy with my little eye...........
View attachment 348211View attachment 348212View attachment 348213View attachment 348214View attachment 348215View attachment 348216
Urban dictionaryIs that a new word in the Cambridge dictionary?![]()
Just hate seeing lovely old vehicles kept like that![]()
Eye spy with my little eye...........
View attachment 348211View attachment 348212View attachment 348213View attachment 348214View attachment 348215View attachment 348216
Is you a subscriber to pe?
Look on top ov the relay it may show the pin layout for the contacts and the coil. Normally has the manufacturerer and part number so yer can look up the datasheet.Ta mate, well I got some of that!!
The £200 solution would be cheap, ugly and involve a lot of faffing around , the "next up" solution would cost at least €585.
Compared to the €60 I have just lashed out on tools and capacitors, to be delivered soemtime next week.
I had a heck of a job sourcing the exact same make and model type of one sort of Cap and the other is exactly the same Mfarads and voltage, as well as size and distance between pins. Both off ManoMano. Pack of 10 caps, €1.5. delivery €9.5! Just realised I needed 2 per stat. Poop!
Still I don't think they'll all be gone, once I get my cap meter I'll know which ones go, physically considering the small ones are cylindrical they look OK, but yep that don't mean much.
The stat's PCB is powered up, the temp sender actions the lickle relay on the board which then sends power back to the consumer unit on which each individual circuit breaker is situated to tell it to close and send massive power to each heating pad. They are designed to take a lot of current as many houses don't have this system and all the power passes through the stat.
I could get a 24 VDC psu for about €20, more or less, but for just this one job?
I too have wondered if the problem could be down to dirty points on the relays. As the relay is stuck so closely to the PCB and I cannot tell which connection does what, I'd have a job putting power across the coil or even testing it for resistance.
I'd have to take one off then open it up to look at, which I might do if nec.
I'll keep you all posted as I know my DIY is good laughs value for you all!!!![]()
![]()
And how many peeps do you know entertaining you with two different systems on two different houses???
I should start my own YouTube channel!![]()
I just started with a cold, also going Scotland on the 4thMorning all. Lots to do. Gonna get the steps off new car and start packing for Scotlandfeel like utter trash as I feel like I have a cold coming on
Just putting this up here. For a laugh!
I once had a colleague who did this.
I first met her when she came into my General Studies class at 16. She was a rather large girl but nonetheless....
She got fabulous A grades then went on to do a degree in eSpanish, and eventually became a colleague.
One day she came to work with an arm in a sling having fallen off her pole.
The mind boggles.
I won't lie, after watching it, i think i want one too! The problem is, the only 'spare' body i have is a disco. I don't think it would look as good as with a Series body on topGreat vid, nice one pal.![]()
That Ferguson is adorable
I'm probably a bit worn out. Not had a week off in 6 months.I just started with a cold, also going Scotland on the 4th
Thought the cold was due to paint fumes but no, it's a damn cold![]()
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!