I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
landowner said:
Hacking off not going well, nearly two hours in now, bigger job than the lad was told so won't be done today, not enough boarding supplied for job so will have to do what he can and then re book it, that'll be six weeks wait then, flippin councils couldn't organise a brewery trip 😡
Click to expand...
I hadn't realised this was being done through a local authority. That's one of the reasons why it costs them so much to maintain their housing stock.

Incidentally, it looks like an interesting partition wall you've got there. Is it hollow clay blocks with ridges embossed on the outside?
 
Brown said:
I hadn't realised this was being done through a local authority. That's one of the reasons why it costs them so much to maintain their housing stock.

Incidentally, it looks like an interesting partition wall you;ve got there. Is it hollow clay blocks with ridges embossed on the outside?
Click to expand...
Yes and the blocks are very brittle, hollow and difficult to drill a clean hole they splinter.
Bungalow built in1950's
 
landowner said:
Hacking off not going well, nearly two hours in now, bigger job than the lad was told so won't be done today, not enough boarding supplied for job so will have to do what he can and then re book it, that'll be six weeks wait then, flippin councils couldn't organise a brewery trip 😡
Click to expand...
just ring up the next day and say the dust is giving you a cough
 
landowner said:
Yes and the blocks are very brittle, hollow and difficult to drill a clean hole they splinter.
Bungalow built in1950's
Click to expand...
Those sorts of things seem to have flourished briefly in this country round about the middle of the last century but didn't really catch on long term. On le continent by contrast, they're everywhere and people are still using them today.

I've found the problem with stripping plaster or render off them that the render is a lot stronger than the clay blocks, if there was a lot of cement in the mix, so it's easy to break them.
 
Brown said:
Those sorts of things seem to have flourished briefly in this country round about the middle of the last century but didn't really catch on long term. On le continent by contrast, they're everywhere and people are still using them today.

I've found the problem with stripping plaster or render off them that the render is a lot stronger than the clay blocks, if there was a lot of cement in the mix, so it's easy to break them.
Click to expand...
The lad is struggling with a bolster chisel, he's sent for a drill of some sort so job stopped again
On the bright side my Jawa just fired up no problem after a while parked up, nipping out for a ride tomorrow :)
 
Afternoon folks :).

landowner said:
Need to renew my drivers licence again, doin it on line :cool:
Click to expand...
Well you are lucky.
We spent yesterday in the big town, in a hospital getting checked for our driving license renewal. Well not exactly checked but walk around 6 different docs offices to pay £5 for a rubber stamp so he could check we can stand and wait outside for a while. The only 1 that actual did anything was the eye doc, and the last doc who took our BP then charged us £15 to finalize the certificate.
So that was a whole day.
Today was back to big town. to submit said docs and fill in some more before being rubber stamped and told to come back in 30days, for that I paid £5 cos I is an oldie;) Ms was £10.

The reason is because we want to keep all our large vehicle categories. If we only went for the basic cats we would have only had to visit 3 or 4 docs, but believe our local doc could have done that for us, but his rubber stamp is not good enough for all.

Oh and its 5 yearly cos of the cats, So for all those that can sit at home and fill a form in online, I dream of those days, but they are coming I do believe/hope.
Well they are cos we can actually "ping " plastic these days where before it was strictly cash only.

But apart from that the suns been out for 2 days now and we are actually debating weather to light the fire, Suns going down and its starting to lower the temp so it will probably be a yes.

J
 
Just taken the Christmas decorations down. It's 12th night (well, I know some people count it as the 6th, but the 5th seems to be one of the possibilities too). Probably just as well, because the cats were starting to tamper with the ornaments. As I was working at my desk this morning I kept hearing the 'ting' of baubles being knocked off the tree onto the floor. All safely stowed in the attic for next year.
 
Brown said:
Those sorts of things seem to have flourished briefly in this country round about the middle of the last century but didn't really catch on long term. On le continent by contrast, they're everywhere and people are still using them today.

I've found the problem with stripping plaster or render off them that the render is a lot stronger than the clay blocks, if there was a lot of cement in the mix, so it's easy to break them.
Click to expand...
We have them here.
Thankfully they are only in the upstairs rooms (we built up a bit).
But yes I will agree they are a PITA.

landowner said:
Hacking off not going well, nearly two hours in now, bigger job than the lad was told so won't be done today, not enough boarding supplied for job so will have to do what he can and then re book it, that'll be six weeks wait then, flippin councils couldn't organise a brewery trip 😡
Click to expand...

Why does he not have enough board?
So now you are about to tell me hes going to stick plasterboard to the wall :vb-groan2:
Render and plaster came off, that's what should go back on end of.
You stand a chance of holding up a picture if you can fix a raw plug into render and those blocks, plaster board forget it.
That architrave around the door needs to come off to do a proper job too.

Never easy when you are not in control that's the problem.

J
 
marjon said:
We have them here.
Thankfully they are only in the upstairs rooms (we built up a bit).
But yes I will agree they are a PITA.



Why does he not have enough board?
So now you are about to tell me hes going to stick plasterboard to the wall :vb-groan2:
Render and plaster came off, that's what should go back on end of.
You stand a chance of holding up a picture if you can fix a raw plug into render and those blocks, plaster board forget it.
That architrave around the door needs to come off to do a proper job too.

Never easy when you are not in control that's the problem.

J
Click to expand...
Boarding it but just a bodge, still loose plaster in places, needs to come off
 

Attachments

  • 17044667071158102155707223133751.jpg
    17044667071158102155707223133751.jpg
    163.1 KB · Views: 30
You must log in or register to reply here.

Similar threads

L
Learning to fix Land Rovers like a pro - career advice wanted
Replies
10
Views
661
kevstar
kevstar
K
What money should I be asking?
Replies
18
Views
637
Anaconda
A
Lackingsense
Sport Air suspension/HDC fault
Replies
14
Views
1K
Lackingsense
Lackingsense
J
300 Tdi engine swap story - and a few questions
Replies
13
Views
1K
doriz
doriz
J
300 Tdi Engine back in, nearly - Story and at the end Questions
Replies
0
Views
515
jer_300Tdi_90
J
Back
Top