- Posts
- 7,014
- Location
- uk
---Part time slaughter house workerIs it the one who's hobby is bricklaying
I would just like to say
- Thread starter Hippo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 23,933
- Location
- In the next Glen
First rhubarb crumble of the year lovely it was to with custard, extra time in the loo tomorrow
The misses made apple crumble today, I was allowed a taster before my slow cooked silverside
- Posts
- 23,933
- Location
- In the next Glen
My old lamp post has been sand blasted, primed & had its first coat of enamel paint. Pics to follow.
its missing 2 doors on the lower part. Tis somit I'll need to make as id guess they will be eggspensive.
its missing 2 doors on the lower part. Tis somit I'll need to make as id guess they will be eggspensive.
- Posts
- 23,933
- Location
- In the next Glen
- Posts
- 23,933
- Location
- In the next Glen
Need to switch your heater on then!!
My side was on cold with window down a bit misses side on molten overload & heated seat on.
- Posts
- 7,014
- Location
- uk
Hope that's not the finished colour - you'll be looking for an FL next
- Posts
- 23,933
- Location
- In the next Glen
Hope that's not the finished colour - you'll be looking for an FL next
Go n wash your mouth out
When you coming round round to erect my pink pole
- Posts
- 7,014
- Location
- uk
Made me laff. And speechlessGo n wash your mouth out
When you coming round round to erect my pink pole
- Posts
- 13,080
- Location
- Far out West
Hippo
Lord Hippo
- Posts
- 55,075
Fixed me drill. It would randomly go frew a phase of doing nowt. Lights illuminated when pressing the trigger but no spin. Web ses to solder the wire joints and switch. Other peeps resolved the same fsult on thiers. Same make model. Din't wuk but got a bit betterer so eye tightened up the crimps on the motor wires. Still problems. Next cleaned the crimps and motor pins wiv pcb cleaner. That sorted it.
Morning
Cloudy bright and dry
Need grey garage floor paint, (no, not floor paint for a grey garage)
Got all the way through the 1% club last night
Volvo takes ages to start recently, no faults and I put new glow plugs in so thinking fuel
Bathroom still not right, loose trim on window cill
Have a greatMonday Tuesday all
Cloudy bright and dry
Need grey garage floor paint, (no, not floor paint for a grey garage)
Got all the way through the 1% club last night
Volvo takes ages to start recently, no faults and I put new glow plugs in so thinking fuel
Bathroom still not right, loose trim on window cill
Have a great
- Posts
- 23,933
- Location
- In the next Glen
Suns oot today ya beauty
- Posts
- 46,809
- Location
- East Dorset
Must be suge saucers!!!!
- Posts
- 46,809
- Location
- East Dorset
Sat here on dockside, bin told ferry will be 1 and a half hours late leaving due to HMS Prince of Wales leaving. It went 8minutes ago.
Mind there are also 2 cruise ships in. SAGALOUTs all loading up.
Have a good one folks.
Mind there are also 2 cruise ships in. SAGALOUTs all loading up.
Have a good one folks.
Sat here on dockside, bin told ferry will be 1 and a half hours late leaving due to HMS Prince of Wales leaving. It went 8minutes ago.
Mind there are also 2 cruise ships in. SAGALOUTs all loading up.
Have a good one folks.
Have a good trip
Got your passports?
.Bet you checked
.J
- Posts
- 46,809
- Location
- East Dorset
Well they did when we checked in!!!
This is the longest delay I have ever known for a ferry.
Have known longer for a plane though
This is the longest delay I have ever known for a ferry.
Have known longer for a plane though
The advantage of having a single burner and a kettle with supplies for a cuppaWell they did when we checked in!!!
This is the longest delay I have ever known for a ferry.
Have known longer for a plane though
. Never leave home without them on a long trip.J
WhiskyLassie
Well-Known Member
- Posts
- 5,629
- Location
- Uk
3.10am today
- Posts
- 23,933
- Location
- In the next Glen
Painted........
Similar threads
