I would just like to say

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
kevstar said:
Only one circoolar dewalt which im keepin as my other one packed in last year
& I never replaced it. Sorry matey ;)

View attachment 227112
Click to expand...
Oh Blast!!!!
The one it would be replacing is exactly that, an older Dewalt batt driven.
Can see why you are hanging on to it!
Will just have to take it apart and replace the bearing.
Cuts OK but I am just about to cut my new worktop down from 900 mm to 700mm, plus trimming the two ends as the angles will need to be just off 90 degrees.:rolleyes: so I'd like it to be right on the ticket.
Have you got loads of batts and a charger? I got some recently off the bay, they were half the price of the original. and they fit the charger fine too.
You are twice blessed my friend!:):):):)
 
Stanleysteamer said:
Oh Blast!!!!
The one it would be replacing is exactly that, an older Dewalt batt driven.
Can see why you are hanging on to it!
Will just have to take it apart and replace the bearing.
Cuts OK but I am just about to cut my new worktop down from 900 mm to 700mm, plus trimming the two ends as the angles will need to be just off 90 degrees.:rolleyes: so I'd like it to be right on the ticket.
Have you got loads of batts and a charger? I got some recently off the bay, they were half the price of the original. and they fit the charger fine too.
You are twice blessed my friend!:):):):)
Click to expand...

Sorry matey, if you were closer you could have just borrowed it or anything else ;)
I got 4 batteries & 1 charger but del has 2 chargers, & a full set of dewalt tools including a
radio lol
Two of his batteries packed in before Christmas so he is down to 3, apparently you can link
dead batteries to boost the charge an bring them back to life ?? I used to do it with car batteries
years ago which worked, probably best to try it outside.

Pics of the strip down of the saw & worktop are required as its the thread rules. :):)
 
Oh, spleen vent.
Guess whose dippy SWMBO put her phone in with the laundry an then rang me, at work, twenty bloody miles away, coz she couldn't get the washing machine to stop and drain?
Same one as had extracted same phone by the time I got home but didn't think to tell me en route! Fer effin Jeff's feffin effs sake!
Anybody gots an unlocked (or O2) Galaxy S5 or similar to flog? :)
 
kevstar said:
Sorry matey, if you were closer you could have just borrowed it or anything else ;)
I got 4 batteries & 1 charger but del has 2 chargers, & a full set of dewalt tools including a
radio lol
Two of his batteries packed in before Christmas so he is down to 3, apparently you can link
dead batteries to boost the charge an bring them back to life ?? I used to do it with car batteries
years ago which worked, probably best to try it outside.

Pics of the strip down of the saw & worktop are required as its the thread rules. :):)
Click to expand...
I think we'd all appreciate a thread on how to bring batteries back to life, I've heard of doing it other ways and even paid for a stupid little guide which turned out to be rubbish.

I've just ordered a pair of trestles as both my other pairs are in Frogland (this happens all the time, i have a new circooler saw over there which has seen hardly any use :rolleyes:. TBH, if changing the bearing proves a PITA I'll borrow one off my ex son-in-law, he is really trusting of his tools with me, and the Dewalts (drill and circualr saw) came from him originally, in their original case. He decided to change all his kit to Makita, yes including the radio!) and I use the drill ALL the time. three speeds, hammer etc, and it is old enough to still have quite a bit of metal in it. It is so good i actually take it with me from country to country although i have extensive tool collections in both places.
Dunno when I'll be doing the job now as I might do the other side of the room first, which is all big cupboards, two will be with the pull out cages and the others will be conventional though one will be highly modified.
We'll see!:):)
 
Turktowner said:
Oh, spleen vent.
Guess whose dippy SWMBO put her phone in with the laundry an then rang me, at work, twenty bloody miles away, coz she couldn't get the washing machine to stop and drain?
Same one as had extracted same phone by the time I got home but didn't think to tell me en route! Fer effin Jeff's feffin effs sake!
Anybody gots an unlocked (or O2) Galaxy S5 or similar to flog? :)
Click to expand...
Was it switched on at the time? Allegedly it IS possible to dry one out, I found it on the internet one day. can't think why I looked for it.
Best of luck with it all.
 
You must log in or register to reply here.

Similar threads

L
Learning to fix Land Rovers like a pro - career advice wanted
Replies
9
Views
525
Andy Warren
Andy Warren
K
What money should I be asking?
Replies
18
Views
563
Anaconda
A
Lackingsense
Sport Air suspension/HDC fault
Replies
14
Views
976
Lackingsense
Lackingsense
J
300 Tdi engine swap story - and a few questions
Replies
13
Views
1K
doriz
doriz
J
300 Tdi Engine back in, nearly - Story and at the end Questions
Replies
0
Views
506
jer_300Tdi_90
J
Back
Top