i need a new distributor but finding it hard to find the right one

Nick176 · Jul 25, 2011

my engine is a 3.9 V8, the distributor i need does NOT have a ignition module on the side, that module is seperate. it has a connector on the side which is 2 pin and the pins a horizontal, does any one know where i would be able to get one?

many thanks Nick

boycie · Jul 25, 2011

Is your V8 3.9 pre serpentine or serpentine ie does it have one flat belt that turns the
fan , alternator ect or two V belts ?.

Nick176 · Jul 26, 2011

Hi, it has 1 belt

Nick176 · Jul 26, 2011

i uploaded a picture of the connector that it has

discool · Jul 26, 2011

Is it the connecter you want or the dizzy??
You will find a two pin plug on the link lead STC1212
There are six distributors for the high compression 3.9 to choose from.
So assuming you have an HC engine, cats and your vin is from MA 094073 you need a ERR5209 you will only get a pattern part or referb one these days.

boycie · Jul 26, 2011

Look up Pegasus parts, I have the same engine and distributor they supplied the parts to referb my distributor.I would advise against using
pattern parts

i need a new distributor but finding it hard to find the right one

Nick176

New Member

boycie

Active Member

Nick176

New Member

Nick176

New Member

discool

Well-Known Member

boycie

Active Member

Similar threads