boycie

Hi Datatec
Try as I may cannot get the software to work three adaptors later ,35 mph warning comes up that's it loads of message,s ie this port is not open ,your click has failed ,you need to use the drop down box and others.I bought the kicker plug in works great out of box going for the upgrade ,only problem is the lead is a bit short so I was hoping to us the one I got from you.Regards Doug

No Idea, the EAS kicker comes with it's own connector. The EAS kicker is a waste of cash if you have the EAS software and a laptop.

Just found them in the Bearmach catalogue. And they have them in the 4x4 mail order catalogue,if I get a chance I will ring them tomorrow THANKS.

I think they were about that price I should be able to claim back the vat.Any idea who stocks them?.

how much were they bearmach do some at £200 ish,no havent got it off yet fork lifts needs fuel system draining

Thanks Martin something I want to do later ,(your bloody idea).Do you know what size crown wheel and pinion I should fit ?. The transfer box I have fitted at the
moment is pretty good, very very slightly under geared.

i might have i look on monday more or less but you need longer fron prop and linkage etc just a bolt in job ,probably got all the bits

hi, reasonably easy with a chesty cold its when i feel right will be harder

Is that the same as a standard discovery ?.

not really unless someone does after market sprockets they are 1.2 like disco lt230

yes fitted quite quite a few to defenders and discos ,my own silver one has had one for 10 years ,you dont have to keep worrying about putting it in and out of lock especially good in varied conditions

Are you cutting the fags down to what 60 /70 a day

had a **** cold on and off will have to lessen the smoking,plenty of time not doing alot tonight